1. Home
  2. Tekla Tedds
  3. Eurocodes engineering standards structural calculations library

Eurocodes engineering standards structural calculations library

Tekla Tedds Tekla Tedds for Word
Modified: 14 Oct 2025
Not version-specific
Tekla Tedds Tekla Tedds for Word

Eurocodes engineering standards structural calculations library

The following Eurocode calculations are available in the Tekla Tedds engineering library. The calculations can be run using recommended Eurocode values, or the National Annex values of the UK, Ireland, Finland, Norway, Sweden, Singapore or Malaysia.

UK

STEEL

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Analysis & Design (EN1993)

  • Steel beam splice design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Tata Steel RoofDek Analysis (EN1993/EN1999)

  • Steel sheet piling design (EN1997)

  • Steel member fire resistance design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Windpost design (EN1993)

CONCRETE

  • Foundation Analysis & Design (EN1992/EN1997)

  • Precast Concrete beam design (EN1992)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • Precast Concrete Hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • Precast Concrete Wall Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • RC Column Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Design Toolkit (EC2)

  • RC Nib Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Wall Design (EN1992)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • RC Stair design (EN1992)

  • Steel to Concrete Simple Connection Design (EN1993)

TIMBER

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber section properties (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Timber Beam Analysis & Design (EN1995)

  • Timber Connection Design (EN1995)

  • Timber Frame Racking Panel Design (EN1995)

  • Timber Member Design (EN1995)

  • Timber rafter design (EN1995)

  • Timber joist design (EN1995)

  • Timber stud design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Timber Frame Racking Loads (EN1991)

MASONRY

  • Masonry Bearing Design (EN1996)

  • Masonry Column Design (EN1996)

  • Masonry Wall Panel Design (EN1996)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Steel Masonry Support (EN1993)

  • Windpost design (EN1993)

BEAMS

  • Beam Analysis

  • Crane gantry girder design (EN1993)

  • Precast Concrete Beam Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Analysis & Design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Timber Beam Analysis & Design (EN1995)

  • Timber Member Design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Steel member fire resistance design (EN1993)

SECTION PROPERTIES

  • Section Properties Calculator

COLUMNS

  • Column Base Plate Design (EN1993)

  • Masonry Column Design (EN1996)

  • RC Column Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Timber Member Design (EN1995)

  • Timber Member Analysis & Design (EN1995)

  • Flitch Member Analysis & Design (EN1995)

  • Glulam Member Analysis & Design (EN1995)

  • Composite LVL Member Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

FOUNDATIONS

  • Bearing Pressures for Rectangular Footings

  • Foundation Analysis & Design (EN1992/EN1997)

  • RC pile cap design (EN1992/EN1997)

  • RC raft foundation (EN1992)

  • Pile Analysis (EN1997)

  • Pile Group Analysis

RETAINING WALLS

  • Gabion Retaining Wall Analysis & Design (EN1997)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • Steel sheet piling design (EN1997)

LOADING

  • Dead Loading

  • Hipped End Loading

  • Outrigger loading design (EN1997/TWf)

  • Rigid Diaphragm Force Distribution

  • Snow Loading (EN1991)

  • Wind Loading (EN1991)

  • Timber Frame Racking Loads (EN1991)

ANALYSIS

  • 2D Frame Analysis

  • Beam Analysis

  • Pile Analysis (EN1997)

  • Rigid Diaphragm Force Distribution

  • Rolling load analysis

CONNECTIONS

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Nib Design (EN1992)

  • Steel beam splice design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel simple connection design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Timber Connection Design (EN1995)

PORTAL FRAMES

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Hipped End Loading

FLOORS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Precast concrete hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Stair design (EN1992)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Timber joist design (EN1995)

WALLS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • Masonry Bearing Design (EN1996)

  • Masonry Wall Panel Design (EN1996)

  • RC Wall Design (EN1992)

  • Timber Frame Racking Panel Design (EN1995)

  • Timber stud design (EN1995)

  • Steel sheet piling design (EN1997)

  • Windpost design (EN1993)

DRAINAGE

  • Drain & Sewer Design

  • Open Channel Flow

  • Stormwater Drainage

HIGHWAYS

  • Cut and Fill

EARTHWORKS

  • Cut and Fill

  • Slope Stability

MISCELLANEOUS

  • Co-ordinate Conversion

  • Batch design

COMPONENT CALCULATIONS

  • Steel section classification (EN1993)

  • Steel section sketch

Ireland

STEEL

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Analysis & Design (EN1993)

  • Steel beam splice design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel sheet piling design (EN1997)

  • Steel member fire resistance design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Windpost design (EN1993)

CONCRETE

  • Foundation Analysis & Design (EN1992/EN1997)

  • Precast Concrete beam design (EN1992)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • Precast Concrete Hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • Precast Concrete Wall Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • RC Column Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Design Toolkit (EC2)

  • RC Nib Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Wall Design (EN1992)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • RC Stair design (EN1992)

  • Steel to Concrete Simple Connection Design (EN1993)

TIMBER

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber section properties (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Timber Beam Analysis & Design (EN1995)

  • Timber Connection Design (EN1995)

  • Timber Member Design (EN1995)

  • Timber rafter design (EN1995)

  • Timber joist design (EN1995)

  • Timber stud design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Timber Frame Racking Loads (EN1991)

MASONRY

  • Masonry Bearing Design (EN1996)

  • Masonry Column Design (EN1996)

  • Masonry Wall Panel Design (EN1996)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Steel Masonry Support (EN1993)

  • Windpost design (EN1993)

BEAMS

  • Beam Analysis

  • Precast Concrete Beam Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Analysis & Design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Timber Beam Analysis & Design (EN1995)

  • Timber Member Design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Steel member fire resistance design (EN1993)

COMPONENT CALCULATIONS

  • Steel section classification (EN1993)

  • Steel section sketch

COLUMNS

  • Column Base Plate Design (EN1993)

  • Masonry Column Design (EN1996)

  • RC Column Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Timber Member Design (EN1995)

  • Timber Member Analysis & Design (EN1995)

  • Flitch Member Analysis & Design (EN1995)

  • Glulam Member Analysis & Design (EN1995)

  • Composite LVL Member Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

FOUNDATIONS

  • Bearing Pressures for Rectangular Footings

  • Foundation Analysis & Design (EN1992/EN1997)

  • RC pile cap design (EN1992/EN1997)

  • RC raft foundation (EN1992)

  • Pile Analysis (EN1997)

  • Pile Group Analysis

RETAINING WALLS

  • Gabion Retaining Wall Analysis & Design (EN1997)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • Steel sheet piling design (EN1997)

LOADING

  • Dead Loading

  • Hipped End Loading

  • Outrigger loading design (EN1997/TWf)

  • Rigid Diaphragm Force Distribution

  • Snow Loading (EN1991)

  • Wind Loading (EN1991)

  • Timber Frame Racking Loads (EN1991)

ANALYSIS

  • 2D Frame Analysis

  • Beam Analysis

  • Pile Analysis (EN1997)

  • Rigid Diaphragm Force Distribution

  • Rolling load analysis

CONNECTIONS

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Nib Design (EN1992)

  • Steel beam splice design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel simple connection design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Timber Connection Design (EN1995)

PORTAL FRAMES

  • Column Base Plate Design (EN1993)

  • Hipped End Loading

FLOORS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Precast concrete hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Stair design (EN1992)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Timber joist design (EN1995)

WALLS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • Masonry Bearing Design (EN1996)

  • Masonry Wall Panel Design (EN1996)

  • RC Wall Design (EN1992)

  • Timber Frame Racking Panel Design (EN1995)

  • Timber stud design (EN1995)

  • Steel sheet piling design (EN1997)

  • Windpost design (EN1993)

DRAINAGE

  • Drain & Sewer Design

  • Open Channel Flow

  • Stormwater Drainage

HIGHWAYS

  • Cut and Fill

EARTHWORKS

  • Cut and Fill

  • Slope Stability

SECTION PROPERTIES

  • Section Properties Calculator

MISCELLANEOUS

  • Co-ordinate Conversion

  • Batch design

Finland

STEEL

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Steel 2D Analysis & Design (EN1993)

  • Steel beam splice design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel sheet piling design (EN1997)

  • Steel member fire resistance design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Windpost design (EN1993)

CONCRETE

  • Foundation Analysis & Design (EN1992/EN1997)

  • Precast Concrete beam design (EN1992)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • Precast Concrete Hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • Precast Concrete Wall Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • RC Column Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Design Toolkit (EC2)

  • RC Nib Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Wall Design (EN1992)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • RC Stair design (EN1992)

  • Steel to Concrete Simple Connection Design (EN1993)

TIMBER

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber section properties (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Timber Connection Design (EN1995)

  • Timber Member Design (EN1995)

  • Timber rafter design (EN1995)

  • Timber joist design (EN1995)

  • Timber stud design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Timber Frame Racking Loads (EN1991)

MASONRY

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Steel Masonry Support (EN1993)

  • Windpost design (EN1993)

ANALYSIS

  • 2D Frame Analysis

  • Beam Analysis

  • Pile Analysis (EN1997)

  • Rigid Diaphragm Force Distribution

  • Rolling load analysis

BEAMS

  • Beam Analysis

  • Crane gantry girder design (EN1993)

  • Precast Concrete Beam Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Timber Member Design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Steel member fire resistance design (EN1993)

COLUMNS

  • Column Base Plate Design (EN1993)

  • RC Column Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Timber Member Design (EN1995)

  • Timber Member Analysis & Design (EN1995)

  • Flitch Member Analysis & Design (EN1995)

  • Glulam Member Analysis & Design (EN1995)

  • Composite LVL Member Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

FOUNDATIONS

  • Bearing Pressures for Rectangular Footings

  • Foundation Analysis & Design (EN1992/EN1997)

  • RC pile cap design (EN1992/EN1997)

  • RC raft foundation (EN1992)

  • Pile Analysis (EN1997)

  • Pile Group Analysis

RETAINING WALLS

  • Gabion Retaining Wall Analysis & Design (EN1997)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • Steel sheet piling design (EN1997)

LOADING

  • Dead Loading

  • Hipped End Loading

  • Outrigger loading design (EN1997/TWf)

  • Rigid Diaphragm Force Distribution

  • Snow Loading (EN1991)

  • Wind Loading (EN1991)

  • Timber Frame Racking Loads (EN1991)

CONNECTIONS

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Nib Design (EN1992)

  • Steel beam splice design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel simple connection design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Timber Connection Design (EN1995)

PORTAL FRAMES

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Hipped End Loading

FLOORS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Precast concrete hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Stair design (EN1992)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Timber joist design (EN1995)

WALLS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • RC Wall Design (EN1992)

  • Timber stud design (EN1995)

  • Steel sheet piling design (EN1997)

  • Windpost design (EN1993)

DRAINAGE

  • Drain & Sewer Design

  • Open Channel Flow

  • Stormwater Drainage

HIGHWAYS

  • Cut and Fill

EARTHWORKS

  • Cut and Fill

  • Slope Stability

SECTION PROPERTIES

  • Section Properties Calculator

MISCELLANEOUS

  • Co-ordinate Conversion

  • Batch design

COMPONENT CALCULATIONS

  • Steel section classification (EN1993)

  • Steel section sketch

Norway

STEEL

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Steel 2D Analysis & Design (EN1993)

  • Steel beam splice design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel sheet piling design (EN1997)

  • Steel member fire resistance design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Windpost design (EN1993)

CONCRETE

  • Foundation Analysis & Design (EN1992/EN1997)

  • Precast Concrete beam design (EN1992)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • Precast Concrete Hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • Precast Concrete Wall Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • RC Column Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Design Toolkit (EC2)

  • RC Nib Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Wall Design (EN1992)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • RC Stair design (EN1992)

  • Steel to Concrete Simple Connection Design (EN1993)

TIMBER

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber section properties (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Timber Connection Design (EN1995)

  • Timber Member Design (EN1995)

  • Timber rafter design (EN1995)

  • Timber joist design (EN1995)

  • Timber stud design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Timber Frame Racking Loads (EN1991)

MASONRY

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Steel Masonry Support (EN1993)

  • Windpost design (EN1993)

ANALYSIS

  • 2D Frame Analysis

  • Beam Analysis

  • Pile Analysis (EN1997)

  • Rigid Diaphragm Force Distribution

  • Rolling load analysis

BEAMS

  • Beam Analysis

  • Crane gantry girder design (EN1993)

  • Precast Concrete Beam Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Timber Member Design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Steel member fire resistance design (EN1993)

COLUMNS

  • Column Base Plate Design (EN1993)

  • RC Column Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Timber Member Design (EN1995)

  • Timber Member Analysis & Design (EN1995)

  • Flitch Member Analysis & Design (EN1995)

  • Glulam Member Analysis & Design (EN1995)

  • Composite LVL Member Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

FOUNDATIONS

  • Bearing Pressures for Rectangular Footings

  • Foundation Analysis & Design (EN1992/EN1997)

  • RC pile cap design (EN1992/EN1997)

  • RC raft foundation (EN1992)

  • Pile Analysis (EN1997)

  • Pile Group Analysis

RETAINING WALLS

  • Gabion Retaining Wall Analysis & Design (EN1997)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • Steel sheet piling design (EN1997)

LOADING

  • Dead Loading

  • Hipped End Loading

  • Outrigger loading design (EN1997/TWf)

  • Rigid Diaphragm Force Distribution

  • Snow Loading (EN1991)

  • Wind Loading (EN1991)

  • Timber Frame Racking Loads (EN1991)

CONNECTIONS

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Nib Design (EN1992)

  • Steel beam splice design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel simple connection design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Timber Connection Design (EN1995)

PORTAL FRAMES

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Hipped End Loading

FLOORS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Precast concrete hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Stair design (EN1992)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Timber joist design (EN1995)

WALLS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • RC Wall Design (EN1992)

  • Timber stud design (EN1995)

  • Steel sheet piling design (EN1997)

  • Windpost design (EN1993)

DRAINAGE

  • Drain & Sewer Design

  • Open Channel Flow

  • Stormwater Drainage

HIGHWAYS

  • Cut and Fill

EARTHWORKS

  • Cut and Fill

  • Slope Stability

SECTION PROPERTIES

  • Section Properties Calculator

MISCELLANEOUS

  • Co-ordinate Conversion

  • Batch design

COMPONENT CALCULATIONS

  • Steel section classification (EN1993)

  • Steel section sketch

Sweden

STEEL

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Steel 2D Analysis & Design (EN1993)

  • Steel beam splice design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel sheet piling design (EN1997)

  • Steel member fire resistance design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Windpost design (EN1993)

CONCRETE

  • Foundation Analysis & Design (EN1992/EN1997)

  • Precast Concrete beam design (EN1992)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • Precast Concrete Hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • Precast Concrete Wall Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • RC Column Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Design Toolkit (EC2)

  • RC Nib Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Wall Design (EN1992)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • RC Stair design (EN1992)

  • Steel to Concrete Simple Connection Design (EN1993)

TIMBER

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber section properties (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Timber Connection Design (EN1995)

  • Timber Member Design (EN1995)

  • Timber rafter design (EN1995)

  • Timber joist design (EN1995)

  • Timber stud design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Timber Frame Racking Loads (EN1991)

MASONRY

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Steel Masonry Support (EN1993)

  • Windpost design (EN1993)

ANALYSIS

  • 2D Frame Analysis

  • Beam Analysis

  • Pile Analysis (EN1997)

  • Rigid Diaphragm Force Distribution

  • Rolling load analysis

BEAMS

  • Beam Analysis

  • Crane gantry girder design (EN1993)

  • Precast Concrete Beam Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Timber Member Design (EN1995)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Steel member fire resistance design (EN1993)

COLUMNS

  • Column Base Plate Design (EN1993)

  • RC Column Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Timber Member Design (EN1995)

  • Timber Member Analysis & Design (EN1995)

  • Flitch Member Analysis & Design (EN1995)

  • Glulam Member Analysis & Design (EN1995)

  • Composite LVL Member Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

FOUNDATIONS

  • Bearing Pressures for Rectangular Footings

  • Foundation Analysis & Design (EN1992/EN1997)

  • RC pile cap design (EN1992/EN1997)

  • RC raft foundation (EN1992)

  • Pile Analysis (EN1997)

  • Pile Group Analysis

RETAINING WALLS

  • Gabion Retaining Wall Analysis & Design (EN1997)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • Steel sheet piling design (EN1997)

LOADING

  • Dead Loading

  • Hipped End Loading

  • Outrigger loading design (EN1997/TWf)

  • Rigid Diaphragm Force Distribution

  • Snow Loading (EN1991)

  • Wind Loading (EN1991)

  • Timber Frame Racking Loads (EN1991)

CONNECTIONS

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Nib Design (EN1992)

  • Steel beam splice design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel simple connection design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Timber Connection Design (EN1995)

PORTAL FRAMES

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Hipped End Loading

FLOORS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber floor panel design (EN1995)

  • Precast concrete hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Stair design (EN1992)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Timber joist design (EN1995)

WALLS

  • Cross-laminated timber section design (EN1995)

  • Cross-laminated timber wall panel design (EN1995)

  • RC Wall Design (EN1992)

  • Timber stud design (EN1995)

  • Steel sheet piling design (EN1997)

  • Windpost design (EN1993)

DRAINAGE

  • Drain & Sewer Design

  • Open Channel Flow

  • Stormwater Drainage

HIGHWAYS

  • Cut and Fill

EARTHWORKS

  • Cut and Fill

  • Slope Stability

SECTION PROPERTIES

  • Section Properties Calculator

MISCELLANEOUS

  • Co-ordinate Conversion

  • Batch design

COMPONENT CALCULATIONS

  • Steel section classification (EN1993)

  • Steel section sketch

Singapore

STEEL

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Analysis & Design (EN1993)

  • Steel beam splice design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel sheet piling design (EN1997)

  • Steel member fire resistance design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Windpost design (EN1993)

CONCRETE

  • Foundation Analysis & Design (EN1992/EN1997)

  • Precast Concrete beam design (EN1992)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • Precast Concrete Hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • Precast Concrete Wall Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • RC Column Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Design Toolkit (EC2)

  • RC Nib Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Wall Design (EN1992)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • RC Stair design (EN1992)

  • Steel to Concrete Simple Connection Design (EN1993)

TIMBER

  • Timber Frame Racking Panel Design (EN1995)

MASONRY

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Steel Masonry Support (EN1993)

  • Windpost design (EN1993)

BEAMS

  • Beam Analysis

  • Crane gantry girder design (EN1993)

  • Precast Concrete Beam Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Analysis & Design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Steel member fire resistance design (EN1993)

SECTION PROPERTIES

  • Section Properties Calculator

COLUMNS

  • Column Base Plate Design (EN1993)

  • RC Column Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel Member Analysis & Design (EN1993)

FOUNDATIONS

  • Bearing Pressures for Rectangular Footings

  • Foundation Analysis & Design (EN1992/EN1997)

  • RC pile cap design (EN1992/EN1997)

  • RC raft foundation (EN1992)

  • Pile Analysis (EN1997)

  • Pile Group Analysis

RETAINING WALLS

  • Gabion Retaining Wall Analysis & Design (EN1997)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • Steel sheet piling design (EN1997)

LOADING

  • Dead Loading

  • Hipped End Loading

  • Outrigger loading design (EN1997/TWf)

  • Rigid Diaphragm Force Distribution

  • Timber Frame Racking Loads (EN1991)

ANALYSIS

  • 2D Frame Analysis

  • Beam Analysis

  • Pile Analysis (EN1997)

  • Rigid Diaphragm Force Distribution

  • Rolling load analysis

CONNECTIONS

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Nib Design (EN1992)

  • Steel beam splice design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel simple connection design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

PORTAL FRAMES

  • Column Base Plate Design (EN1993)

  • Crane gantry girder design (EN1993)

  • Hipped End Loading

FLOORS

  • Precast concrete hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Stair design (EN1992)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

WALLS

  • RC Wall Design (EN1992)

  • Steel sheet piling design (EN1997)

  • Windpost design (EN1993)

DRAINAGE

  • Drain & Sewer Design

  • Open Channel Flow

  • Stormwater Drainage

HIGHWAYS

  • Cut and Fill

EARTHWORKS

  • Cut and Fill

  • Slope Stability

MISCELLANEOUS

  • Co-ordinate Conversion

  • Batch design

COMPONENT CALCULATIONS

  • Steel section classification (EN1993)

  • Steel section sketch

Malaysia

STEEL

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Analysis & Design (EN1993)

  • Steel beam splice design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel member fire resistance design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

  • Windpost design (EN1993)

CONCRETE

  • Foundation Analysis & Design (EN1992/EN1997)

  • Precast Concrete beam design (EN1992)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • Precast Concrete Hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • Precast Concrete Wall Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • RC Column Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Design Toolkit (EC2)

  • RC Nib Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Wall Design (EN1992)

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

  • RC Stair design (EN1992)

  • Steel to Concrete Simple Connection Design (EN1993)

MASONRY

  • Steel Masonry Support (EN1993)

  • Windpost design (EN1993)

BEAMS

  • Beam Analysis

  • Precast Concrete Beam Design (EN1992)

  • RC 2D Analysis & Design (EN1992)

  • RC Beam Analysis & Design (EN1992)

  • RC Beam Design (EN1992)

  • RC Beam Torsion Design (EN1992)

  • Steel 2D Analysis & Design (EN1993)

  • Steel Beam Analysis & Design (EN1993)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

  • Steel Beam Torsion Design (EN1993)

  • Steel Masonry Support (EN1993)

  • Steel Member Analysis & Design (EN1993)

  • Steel Member Design (EN1993)

  • Flitch Beam Analysis & Design (EN1995)

  • Glulam Beam Analysis & Design (EN1995)

  • Composite LVL Beam Analysis & Design (EN1995)

  • Timber 2D analysis & design (EN1995)

  • Steel member fire resistance design (EN1993)

COMPONENT CALCULATIONS

  • Steel section classification (EN1993)

  • Steel section sketch

COLUMNS

  • Column Base Plate Design (EN1993)

  • RC Column Design (EN1992)

  • Precast Concrete Column Design (EN1992)

  • Steel Column and Base Plate Design (EN1993)

  • Steel Column Design (EN1993)

  • Steel Member Design (EN1993)

  • Steel Member Analysis & Design (EN1993)

FOUNDATIONS

  • Bearing Pressures for Rectangular Footings

  • Foundation Analysis & Design (EN1992/EN1997)

  • RC pile cap design (EN1992/EN1997)

  • RC raft foundation (EN1992)

  • Pile Analysis (EN1997)

  • Pile Group Analysis

RETAINING WALLS

  • Retaining Wall Analysis & Design (EN1992/EN1996/EN1997)

  • Retaining basement wall analysis & design (EN1992/EN1997)

LOADING

  • Dead Loading

  • Hipped End Loading

  • Outrigger loading design (EN1997/TWf)

  • Rigid Diaphragm Force Distribution

ANALYSIS

  • 2D Frame Analysis

  • Beam Analysis

  • Pile Analysis (EN1997)

  • Rigid Diaphragm Force Distribution

  • Rolling load analysis

CONNECTIONS

  • Bolt Group Analysis

  • Column Base Plate Design (EN1993)

  • Precast Concrete Bearing Design (EN1992)

  • Precast Concrete Grouted Sleeve Splice Design (EN1992)

  • Precast Concrete Half-joint Design (EN1992)

  • RC Corbel Design (EN1992)

  • RC Nib Design (EN1992)

  • Steel beam splice design (EN1993)

  • Steel Column and Base Plate Design (EN1993)

  • Steel column splice design (EN1993)

  • Steel hollow section tension only splice design (EN1993)

  • Steel simple connection design (EN1993)

  • Steel to Concrete Simple Connection Design (EN1993)

PORTAL FRAMES

  • Column Base Plate Design (EN1993)

  • Hipped End Loading

FLOORS

  • Precast concrete hollowcore slab design (EN1992)

  • Precast Concrete Stair Design (EN1992)

  • RC raft foundation (EN1992)

  • RC Slab Design (EN1992)

  • RC Stair design (EN1992)

  • Steel Beam Supporting Hollowcore Slab Design (EN1993)

WALLS

  • RC Wall Design (EN1992)

  • Windpost design (EN1993)

DRAINAGE

  • Drain & Sewer Design

  • Open Channel Flow

  • Stormwater Drainage

HIGHWAYS

  • Cut and Fill

EARTHWORKS

  • Cut and Fill

  • Slope Stability

SECTION PROPERTIES

  • Section Properties Calculator

MISCELLANEOUS

  • Co-ordinate Conversion

  • Batch design
Was this helpful?
Previous
Next