Tekla Tedds Engineering Library (June 2019)

Tekla Tedds
Tekla Tedds for Word
2019
Tekla Tedds Tekla Tedds for Word
Environment
Australia
British Standard
Canada
Eurocode
USA

Contents

UK and Asia

Updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place. [TEDDS-3517]1 Amended Eurocode combinations for combination generator to omit 'Quasi' combinations when material is timber.

Frame wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Foundation analysis & design (EN1992/EN1997)

[TEDDS-1960]1 Amended calculation to allow users to set punching shear stress factor, b.
[TEDDS-3403]1 Added check box to allow design preview results to be disabled.
[TEDDS-3470]1 Made minor adjustments to output of plain concrete foundations.

Reinforcement schedule (BS8666)

[TEDDS-1280]1 - Adjusted minimum length of dimension B for shape code 29.

Steel beam analysis & design (EN1993)

[TEDDS-1512]1 Steel member design calculation superseded.
[TEDDS-820]1 Corrected the calculation of the design bending resistance moment for Slimflor beams.
[TEDDS-3272]1 Corrected the effective length factors used when loads are classified as destabilising.

Steel member analysis & design (EN1993)
Steel member design (EN1993)

[TEDDS-3130]1 - Corrected output summary tables for calculations with multiple design sections.
[TEDDS-3113]1 - Corrected issue related to columns in 2D analysis models.
[TEDDS-1491]1 - Amended calculation to automatically assign an appropriate steel grade when switching between HC or HR and other section types.
[TEDDS-1473]1 - Changed default steel grade to 'S355'.
[TEDDS-315]1 - Changed calculation to use 'creator' method to set up initial analysis model.

USA

Masonry wall panel design (TMS/MSJC)
Masonry lintel analysis & design (TMS/MSJC)
Masonry lintel design (TMS/MSJC)

Enhanced design in accordance with TMS 402/602-16.

Other updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard

[TEDDS-490]1 Updated for US design to use NDS data lists rather than data tables.
[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-490]1 Updated for US design to use NDS data lists rather than data tables.
[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Steel member analysis & design (AISC360)
Steel member design (AISC360)

[TEDDS-3130]1 - Corrected output summary tables for calculations with multiple design sections.
[TEDDS-315]1 - Changed calculation to use 'creator' method to set up initial analysis model.

Wood ledger design (NDS)

[TEDDS-926]1 Corrected ASD load combination number 4 in ASCE7-10.

Australia

Updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Steel member analysis & design (AS4100)
Steel member design (AS4100)

[TEDDS-3130]1 - Corrected output summary tables for calculations with multiple design sections.
[TEDDS-315]1 - Changed calculation to use 'creator' method to set up initial analysis model.

Canada

Updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Europe

Updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place. [TEDDS-3517]1 Amended Eurocode combinations for combination generator to omit 'Quasi' combinations when material is timber.

Frame wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Foundation analysis & design (EN1992/EN1997)

[TEDDS-1960]1 Amended calculation to allow users to set punching shear stress factor, b.
[TEDDS-3403]1 Added check box to allow design preview results to be disabled.
[TEDDS-3470]1 Made minor adjustments to output of plain concrete foundations.

Steel beam analysis & design (EN1993)

[TEDDS-1512]1 Steel member design calculation superseded.
[TEDDS-820]1 Corrected the calculation of the design bending resistance moment for Slimflor beams.
[TEDDS-3272]1 Corrected the effective length factors used when loads are classified as destabilising.

Steel member analysis & design (EN1993)
Steel member design (EN1993)

[TEDDS-3130]1 - Corrected output summary tables for calculations with multiple design sections.
[TEDDS-3113]1 - Corrected issue related to columns in 2D analysis models.
[TEDDS-1491]1 - Amended calculation to automatically assign an appropriate steel grade when switching between HC or HR and other section types.
[TEDDS-1473]1 - Changed default steel grade to 'S355'.
[TEDDS-315]1 - Changed calculation to use 'creator' method to set up initial analysis model.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Was this helpful?