XS_DSTV_CREATE_NOTCH_ONLY_ON_BEAM_CORNERS
Category in Advanced options dialog: CNC
Use this
advanced option to control the rounding of the notch corners in NC files. The default is FALSE.
This advanced option is model specific and the setting is saved in the options database. Reopen the model to activate the new value.
Examples
The following example describes the concepts of notches, notch corners, notch corner roundings, and beam corners:
- The notch is at the beam corner
- The notch is not at the beam corner
- Three notches, other corners are ordinary corners
- Notch corner inner shape (or notch corner rounding) options in the NC file settings dialog
The table below shows how the XS_DSTV_CREATE_NOTCH_ONLY_ON_BEAM_CORNERS setting (TRUE/FALSE) and the Inner corners shape setting affect the NC file.
XS_DSTV_CREATE_NOTCH_ONLY_ON_BEAM_CORNERS set to
FALSE
|
XS_DSTV_CREATE_NOTCH_ONLY_ON_BEAM_CORNERS set to
TRUE
|
|
| Inner corners shape = 0 |
|
|
| Inner corners shape = 1 |
|
|