XS_DRAWING_CHANGE_HIGHLIGHT_COLOR

Category in Advanced options dialog: Drawing properties

Use this advanced option to change the highlight color of the automatic change symbols. Enter a numeric value or the name of the color.

The default color is magenta on screen and invisible when printing. Other colors are visible also when printing except index 152 (Invisible color).

You can enter any of the following color names: RED, DARK RED, ORANGE, DARK YELLOW, GREEN, DARK GREEN, BLUE, DARK BLUE, BLACK, GREY, DARK GREY, CYAN, DARK CYAN, and MAGENTA.

You can also enter colors as numeric values. You can enter a single color index value (such as 160 for the standard Tekla Structures red color) or a specific custom RGB color. For an RGB color, enter three numeric values separated by spaces (each value in the range 0 to 255). For example, for a specific shade of green, enter 0 220 50.

This advanced option is model specific and the setting is saved in the options database.

Legacy Tekla Structures index values and the corresponding colors:


`0`	Black
1	White
`2`	Red
`3`	Green
`4`	Blue
`5`	Cyan
`6`	Yellow
`7`	Magenta

Standard Tekla Structures index values and the corresponding colors:


152	Invisible
153	Black
160	Red
161	Green
162	Blue
163	Cyan
164	Yellow
165	Magenta
154	Brown
155	Dark green
156	Dark blue
157	Blue-green
158	Orange
159	Gray
130	Gray 30
131	Gray 50
132	Gray 70
133	Gray 90

Example


Set the advanced option to	Color on screen	Color in printed drawings
no value (default)		not visible
`MAGENTA` 165		magenta
`RED` 160		red
`GREEN` 161		green
`BLUE` 162		blue
`BLACK` 153		black
`GREY` 159		gray

XS_DRAWING_CHANGE_HIGHLIGHT_COLOR

XS_​DRAWING_​CHANGE_​HIGHLIGHT_​COLOR

Example

XS_DRAWING_CHANGE_HIGHLIGHT_COLOR