Adjust part mark leader lines with advanced options

You can modify part mark leader line settings using advanced options. On the File menu, click Settings > Advanced options and go to Marking - parts.

To modify part mark leader line settings using advanced options:


To	Do this
Define whether a leader line is drawn when the leader line is shorter than defined with the advanced option XS_DRAW_SHORT_LEADER_LINES_OF_PART_MARKS_MINIMUM_LENGTH	Set XS_DRAW_SHORT_LEADER_LINES_OF_PART_MARKS to `TRUE` (default) to always draw leader lines in part marks. When you set this option to `FALSE`, the leader line is not drawn if it would be shorter than the minimum you set for the advanced option XS_DRAW_SHORT_LEADER_LINES_OF_PART_MARKS_MINIMUM_LENGTH.
Give a minimum length for the leader line. If the length is less than this value, the leader line is not drawn.	Set a value in millimeters for the advanced option XS_DRAW_SHORT_LEADER_LINES_OF_PART_MARKS_MINIMUM_LENGTH.
Define the leader line start position for a leader line with a rectangular frame.	Set a value for the advanced option XS_MARK_LEADER_LINE_POSITION_TYPE_FOR_RECTANGULAR_FRAME.
Define the leader line start position for a leader line of a mark without a frame and for a leader line of a mark with a mark element frame.	Set a value for the advanced option XS_MARK_LEADER_LINE_POSITION_TYPE_FOR_NO_FRAME.
Define the length of the leader line extension.	Set a value for the advanced option XS_MARK_LEADER_LINE_EXTENSION_LENGTH.
Define the height of the arrow head in the mark leader line.	Set a value for the advanced option XS_MARK_LEADER_LINE_ARROW_HEIGHT.
Define the length of the arrow head in the mark leader line.	Set a value for the advanced option XS_MARK_LEADER_LINE_ARROW_LENGTH.