Modify user-defined drawing attribute values

You can modify the user-defined attribute (UDA) values before you create a drawing. The drawing UDAs may vary according to the environment.

The maximum length of the drawing user-defined attribute values is 255 characters.

On the Drawings & reports tab, click Drawing properties and select the drawing type.
Load drawing properties that are as close to the ones you need as possible.
Click User-defined attributes.
On the Workflow tab, enter project-specific information to be displayed in drawings and in the Document manager.
On the Parameters tab, enter a user-defined Comment for drawings, projects, assemblies, parts, and so on.
Use the User field 1 to User field 8 on the Parameters tab to enter drawing-specific information.
On the Title block tab (general arrangement drawings), specify company, project, and drawing information to be used in the title block of the drawing.
General arrangement drawings: Click OK.
Click Save to save the drawing properties, then click OK and create the drawing.

Tip:

You can control whether the modifications in user-defined attributes affect all selected drawings in the Document manager at the same time, even if the drawings are of different types by using the advanced option XS_DRAWING_UDAS_MODIFY_ALL_DRAWING_TYPES.