XS_USE_CROSS_FOR_OPENING_SYMBOL
Category in Advanced options dialog box: Drawing properties
Use XS_USE_CROSS_FOR_OPENING_SYMBOL to select how the openings/recesses are shown and the symbols to be used.
The default value is
TRUE, which means
that a cross is used as the opening/recess symbol.
This advanced option is model specific and the setting is saved in the options database.
|
Value |
Description |
|---|---|
|
This is the default. |
Crosses are used as symbols for openings as follows:
If the recess is on the front face of the part, recess symbol and bounding lines are shown as unbroken lines as follows:
If the recess is on the back face of the part, recess symbol and bounding lines are shown as dashed lines as follows:
|
|
|
Shadows are used as symbols for openings as follows:
If the recess is on the front face of the part, there is no recess symbol, and bounding lines are shown as unbroken lines as follows:
If the recess is on the back face of the part, there is no recess symbol, and bounding lines are shown as dashed lines as follows:
|
