XS_SECTION_LINE_COLOR_RGB
Category in Advanced options dialog box: Hatching
Use this advanced option to add extra lines in different colors around automatic hatching in section views.
You can enter a single color index value (such as 160 for the standard Tekla Structures red color) or a specific custom RGB color. For an RGB color, enter three numeric values separated by spaces (each value in the range 0 to 255). For example, for a specific shade of green, enter 0 220 50.
Note:
To show
lines around hatching, and to be able to add extra
lines in different colors, you may need to set
advanced option XS_DRAW_ALL_SECTION_EDGES_IN_DRAWINGS to
TRUE in an initialization file.
This advanced option is model specific and the setting is saved in the options database.
Legacy Tekla Structures index values and the corresponding colors:
| 0 |  Black |
| 1 |  White |
| 2 |  Red |
| 3 |  Green |
| 4 |  Blue |
| 5 |  Cyan |
| 6 |  Yellow |
| 7 | 
Magenta |
Standard Tekla Structures index values and the corresponding colors:
| 152 | 
Invisible |
| 153 |
Black |
| 160 |
Red |
| 161 | Green
|
| 162 |
Blue |
| 163 |
Cyan |
| 164 |
Yellow |
| 165 |
Magenta |
| 154 | 
Brown |
| 155 |  Dark
green |
| 156 |  Dark
blue |
| 157 | 
Blue-green |
| 158 | 
Orange |
| 159 | 
Gray |
| 130 | 
Gray 30 |
| 131 | 
Gray 50 |
| 132 | 
Gray 70 |
| 133 | 
Gray 90 |
In the image below, the advanced option has been set to 0:
In the next example, the value 160 is used:
