1. Home
  2. Tekla Structures
  3. Create models
  4. Create parts, reinforcement, and construction objects
  5. Modify reinforcement
  6. Use adaptivity to modify a reinforcement

Use adaptivity to modify a reinforcement

Tekla Structures
Modified: 14 Nov 2024
2024
Tekla Structures

Use adaptivity to modify a reinforcement

Reinforcement follows the shape of the part also when the reinforcement handles are located on the face or edge of the part.

The following types of adaptivity are available:

  • Fixed adaptivity: handles retain their absolute distances to the nearest part faces.
  • Relative adaptivity: handles retain their relative distances to the nearest part faces in relation to the part’s overall size.
  1. Select a reinforcement.
  2. Right-click and select Adaptivity and then one of the adaptivity options from the pop-up menu.

    When a part is modified, Tekla Structures handles the reinforcement according to the adaptivity selection.

    Tip:

    To modify the general adaptivity settings, click File menu > Settings > Options > General.

    You can also modify the adaptivity settings for each part separately. These modifications override the general settings in the Options dialog.

Adaptivity examples

Reinforcing bars in their original position
Fixed adaptivity
Relative adaptivity
Was this helpful?
Previous
Next