Auto position (S67)

Tekla Structures
2024
Tekla Structures

Auto position (S67)

Auto position (S67) adjusts the position of one or two braces connected to a tower leg, and cuts braces.

Note:

Use Auto position (S67) when you have completed all other work on a model. Changing the model may override the adjustments you make using this component.

Before you start

Create one or two braces and connect them to a tower leg.

Selection order

  1. Select the tower leg.

  2. Select the first brace.

  3. Select the second brace (optional).

  4. Click the middle mouse button to finish.

Picture tab

Use the Picture tab to define the position of braces and cut dimensions.

Dimensions

Description

1

Define the bolt gage lines for the braces.

2

Define the bolt gage line for the tower leg.

3

Select which braces to move.

4

Enter the distance to move the points where the gage lines intersect.

5

Enter the distance from the first bolt in the group to the end of the brace.

6

Enter the distance from the end of the braces to the edge of the tower leg.

7

Select Yes to cut the braces.

8

Define the cut dimension for the braces.

Was this helpful?
Previous
Next