Plate with nail (47)
Plate with nail (47) connects two hollow tube profiles with an end plate that is welded to the secondary part, and two fastener plates with nails, one welded to the end plate and the other welded to the main part.
Objects created
-
End plate
-
Fastener plate
-
Welds
Use for
| Situation | Description |
|---|---|
|
|
Profiles connected with end plate and fastener plates |
Selection order
-
Select the main part (column or beam).
-
Select the secondary part (beam).
The connection is created automatically when the secondary part is selected.
Part identification key
| Description | |
|---|---|
|
1 |
End plate |
|
2 |
Fasterner plates |
Picture tab
Use the Picture tab to define the connection dimensions.
Dimensions
| Description | Default | |
|---|---|---|
|
1 |
End plate edge distance from the upper edge of the secondary beam |
0.5*beam flange thickness |
|
2 |
Vertical position of the nail from the top of the end plate |
10 mm |
|
3 |
End plate edge distance from the lower edge of the secondary beam |
| Description | Default | |
|---|---|---|
|
1 |
Horizontal position of the nail from the end plate edge |
0 |
|
2 |
Horizontal position of the end plate |
0.5*beam web thickness |
Parts tab
Use the Parts tab to define the part properties.
Parts
| Option | Description | Default |
|---|---|---|
|
End plate to beam |
Thickness of the end plate |
1.5*secondary part web thickness |
|
Fastener plate |
Thickness and width of the fastener plate |
Thickness = 10 mm Width = 30 mm |
|
Option |
Description |
Default |
|---|---|---|
|
Pos_No |
Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number. |
The default part start number is defined in the Components settings in . |
|
Material |
Material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Name that is shown in drawings and reports. |
General tab
Click the link below to find out more:
Design tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more:
Welds
Click the link below to find out more: