If you do not use files from the common\inp folder in your environment, copy files from the common environment to your environment.

1. Copy the following files from the common\inp folder in the common environment to your own folder defined by the XS_INP advanced option:

   • IfcPropertySetConfigurations.xsd

   • Bridge view default properties.xml

   • Coordination view default properties.xml

   • Design transfer view default properties.xml

   • Precast view default properties.xml

   • Reference view default properties.xml

   • Steel fabrication view default properties.xml

   • Surface geometry view default properties.xml

2. Copy the \Environments\common\inp\PropertySets folder from the common environment to your own folder defined by the XS_INP advanced option.

   This folder contains XML files for buildingSMART properties. Do not edit these property sets.

   The folder contains the following files:

   • Pset_Common_IFC2x3 (xml)

   • Pest_Common_IFC4 (xml)

   • Pset_Common_IFC4x3 (xml)

   • Pest_Others_IFC2x3 (xml)

   • Pset_Others_IFC4 (xml)

   • Pset_Others_IFC4x3 (xml)

   • Pset_Performance_IFC4 (xml)

   • Pset_Performance_IFC4x3 (xml)

   • Pset_Quantities_IFC4 (xml)

   • Pset_Quantities_IFC4x3 (xml)

1. Browse to the \Environments\common\system folder.
2. Open the standard.IFCObjGrp file in a standard text editor.
3. Create new custom object filters if needed.
4. Copy from <model>\attributes\*.IFCObjGrp to any folder in the XS_SYSTEM path in your environment.