XS_DSTV_REAL_WIDTH_INTO_HEADER_PROFILE_FOR_PLATES
Category in Advanced options dialog box: CNC
Set to TRUE to have the real plate width instead of the nominal plate width in the header information of DSTV files. The default is FALSE.
Here is an example of the difference between the real plate width and the nominal plate width: A user models a plate beam using the profile PL200*10, but then uses part or line cuts to create a 5 mm cut along the length of the plate, for example, to create a root opening for a weld, so that the end result is a plate which is only 195 mm wide. In this case, the real plate width would be 195 mm, and the nominal plate width 200 mm.
Note: This advanced option only affects the profile definition, such as PL10*200, and it
only affects if you have included the width into the profile definition by setting XS_DSTV_PLATE_PROFILE_WITH_WIDTH to
TRUE.This advanced option is model specific and the setting is saved in the options database.