XS_DRAWING_CLONING_IGNORE_CHECK
Category in Advanced options dialog box: Drawing properties
Set to
TRUE
to have
Tekla Structures clone a drawing even though all the parts of the original drawing have been deleted and the position number is the same as in the original drawing. The default is
FALSE
.
Note that when XS_DRAWING_CLONING_IGNORE_CHECK
is set
to TRUE
, Tekla Structures is able to clone a drawing with a selected part that has the same position
number. But if you have selected several parts with the same position number, then
only one cloned drawing is created for that position.
This advanced option is model specific and the setting is saved in the options database.
Example
You have drawing A[A.1] in your
Document manager. You number the model so that the assembly A.1 changes to A.2. In
Document manager, the A[A.1] drawing is marked with an x and with the status message "All parts deleted." Then you number the model again, so that the assembly in the model changes from A.2 back to A.1. To clone, set the advanced option
XS_DRAWING_CLONING_IGNORE_CHECK
to
TRUE
, select the A[A.1] drawing (marked with x) from
Document manager and assembly A.1 from the model, and click
Clone.