1. Home
  2. Tekla Structures
  3. Create models
  4. Create parts, reinforcement, and construction objects
  5. Create reinforcement
  6. Create a reinforcement strand pattern
  7. Debond reinforcement strands

Debond reinforcement strands

Tekla Structures
2022
Tekla Structures

Debond reinforcement strands

  1. Double-click the strand pattern in which you want to debond strands.

    The Strand pattern properties opens.

  2. Click the Debonding button to open the debonding properties.
  3. On the Debonding tab, click the Add button to create a new row in the table.
  4. Enter the strand numbers in the Debonded strands field.

    The strand number is the selection order number of the strand.

    • To set the same values for all the strands, enter all the strand numbers, separated by a space. For example, 1 2 3 4.

    • To set separate values for each strand, click Add to add a new row, then enter the strand number in the Debonded strands field.

  5. Define the debonded lengths.

    To set symmetrical lengths, select the End lengths = start lengths check box and only enter values in the From start or Middle to start fields.

  6. Click Modify.

    Tekla Structures displays the debonded section of the strand in red.

Was this helpful?
Previous
Next