Example: Position dimensioning
Here are some examples of what the position dimensions look like in integrated dimensoning with different settings selected on the Position dimensions tab.
|
Dimensioning setting |
Example |
|---|---|
|
Position parts to is set to None. |
|
|
Position parts to is set to Main part. |
|
|
Position bolts to is set to Working points. |
|
|
Secondary part is dimensioned By bolt. |
|
|
Secondary part is dimensioned By part. |
|
|
Secondary part is dimensioned By both. |
|
|
Secondary part is dimensioned By bolt. Secondary part dimension direction is Neighbor part. Position from is set to Work point. |
(1) Running dimensions start from the intersection of the main and secondary part (=work point) (2) Dimensions are aligned with the neighboring part |
|
Main part bolt position is set to Off. (Main part bolt internal dimensions is set to Internal on the Bolt dimensions tab.) |
|
|
Main part bolt position is set to On. (Main part bolt internal dimensions is set to Internal on the Bolt dimensions tab.) |
By default, create minimum and maximum position dimensions are not created for bolts. For information on how to create these dimensions, see Add minimum and maximum position dimensions to bolts. |
|
Main part skew position is set to Yes. |
|
|
Skew position is set to angle. |
|
|
Centered part is set to Internal. |
|
|
Centered part is set to Position. |
|
|
Centered bolt is set to Internal. |
|
|
Centered bolt is set to Position. |
|
