Category: Concrete Detailing
Set this advanced option to
TRUE to enable
pour management in the currently open model and to show cast-in-place concrete
structures as continuous. The commands that show and create pour objects and pour
breaks in the model and drawings are only available when pour management is enabled.
The default value for new models in the
Concrete contractor role is
TRUE. In the other standard roles, the default value for new models is
This advanced option is model specific and the setting is saved in the options database.
If pour management is enabled in the model, do
not disable it using
XS_ENABLE_POUR_MANAGEMENT, especially in the middle of the
project. This may cause problems if you have drawings containing pour objects,
and if you are sharing your model. The pour objects and pour breaks in the model
and in the drawings may get invalid, and you may lose pour-related modeling