XS_CENTER_TO_CENTER_DISTANCE_IN_ONE_PART_STRING
Category
Marking: Bolts
Sets the format of the element Center-to-center distance in bolt marks, when the bolts are in the same part, for example, in a column or beam flange. Use to define gage information in the bolt mark in the following way:
-
Use the switch
%VALUE%
for the numeric value of a gage. -
You can add text and the option in any order, for example,
%VALUE% GAGE
orGAGE %VALUE%
. -
If
%VALUE%
is missing, Tekla Structures adds the center-to-center distance to the end of the string. -
If this advanced option is not set, only
%VALUE%
is used. -
If Tekla Structures cannot calculate the gage, nothing is added in the mark.
-
The default value value is
GAGE = %VALUE%
.
This advanced option is model specific and the setting is saved in the options database.
Example
There is a symmetrical bolt group in a beam flange. The value for gage is 10.
In the Advanced Options dialog box |
In bolt mark |
---|---|
|
GAGE = 10 |