WELD_ERRORLIST
Shows error codes for a weld if there are issues related to the weld.
The error codes are:
|
Error code |
Description |
|---|---|
|
E1 |
Weld is not in the correct location. |
|
E2 |
Welded parts are not touching each other. |
|
E3 |
Weld is not on the edge of a part. |
|
E4 |
Weld has a cross section type that is not supported. |
|
E5 |
Weld properties are incorrect. |
|
E6 |
There are issues related to the weld preparation of parts. |