Enable pour management
By default, pour management is disabled in new models in most roles. You can enable pour management in the current model in the Advanced Options dialog box.
If pour management is enabled in the model, do
not disable it using
XS_ENABLE_POUR_MANAGEMENT, especially in the middle of the
project. This may cause problems if you have drawings containing pour objects,
and if you are sharing your model. The pour objects and pour breaks in the model
and in the drawings may get invalid, and you may lose all pour-related modeling
- On the File menu, click to open the Advanced options dialog box.
Concrete detailing, set
- Click OK.
Save and re-open the model for the change to take effect.
The commands that show and create pour objects and pour breaks are now available in the model and in drawings.