Moment connection symbols in Tekla Structures drawings (Drawing tools)

Tekla Structures
2021
Tekla Structures

Moment connection symbols in Tekla Structures drawings (Drawing tools)

Moment connections show the beams that are connected to columns with rigid connections.

To display the moment connection symbols for a part in drawings, you need to set the Moment connection to Yes on the End conditions tab in the user-defined attributes of the part in the model.

You can create, update and delete moment connection symbols using drawing tools.

For more information about other tools and macros, see Applications.

Create moment connection symbols (Drawing tools)

In general arrangement drawings, you can create moment connection symbols to show the beams that are connected to columns with rigid connections. The symbols are created according to part end releases. You can create moment connection symbols automatically for all parts in a drawing view, or for selected parts.

Limitations: Moment connection symbols are created to reference lines. This means that offsets are not taken into use.

  1. Open the drawing.
  2. Click the Applications & components button in the side pane to open the Applications & components catalog.
  3. Click the arrow next to Applications to open the applications list.
  4. Double-click Drawing tools to display the Drawing tools toolbar.
  5. Click Create moment connection symbols .
  6. In the Create moment connection symbols dialog box, select the color for the symbols from the color list.
  7. Enter a scale for the symbols in the box next to the color list.
  8. Do one of the following:
    • To create moment connection symbols for all parts in a drawing view, select the view.
    • To create moment connection symbols for selected parts, select the parts.
  9. Click Create.

    The moment connection symbols are created according to analysis part and connection release properties:

    • If a connection exists, start and end release information is read from the Start releases and End releases tabs in analysis part properties.

    • If a connection does not exist, release information is read from the End conditions tab in the user-defined attributes of the part.

Example

Tip:

The moment connection symbol that is used depends on if it points to right, left, down, or up. The symbols are retrieved by default from the xsteel.sym symbol file. If you want to use another symbol, you can modify the symbols in Symbol Editor by opening the xsteel.sym symbol file and modifying the symbols 87 (right symbol), 86 (left symbol), 85 (down symbol), or 84 (symbol up) and saving the changes.

Update moment connection symbols (Drawing tools)

If you want to remove all previously created moment connection symbols and create new ones that are up to date, you can update the moment connection symbols.

  1. Click the Applications & components button in the side pane to open the Applications & components catalog.
  2. Click the arrow next to Applications to open the applications list.
  3. Double-click Drawing tools to display the Drawing tools toolbar.
  4. Click Create moment connection symbols in the Drawing tools toolbar.
  5. Do one of the following:
    • To update the moment connection symbols of all parts in the view, select the view.
    • To update the moment connection symbols of selected parts, select the parts.
  6. Click Create.

When you do this, Tekla Structures removes all previously created symbols, and creates new ones that are up-to-date.

Delete moment connection symbols (Drawing tools)

You can delete moment connection symbols of all parts in a view or of selected parts.

  1. Click the Applications & components button in the side pane to open the Applications & components catalog.
  2. Click the arrow next to Applications to open the applications list.
  3. Double-click Drawing tools to display the Drawing tools toolbar.
  4. Click Create moment connection symbols .
  5. Do one of the following:
    • To delete the moment connection symbols of all parts in the view, select the view.
    • To delete the moment connection symbols of selected parts, select the parts.
  6. Click Delete.
Was this helpful?
Previous
Next