In the Master Drawing Catalog, you can create single-part, assembly and cast unit drawings using cloning templates that you have added there from Document manager.

1. On the Drawings & reports tab, click Create drawings > Master drawing catalog.
2. Double-click the cloning template that you want to use.
3. Go to the Drawing creation tab and specify how dimensions and marks are cloned.

   You can select to ignore the dimensions and marks, clone them, or recreate them.

   The Marks option controls revision marks and all building object marks.

   Selecting Create in the Dimensions and Other marks box is useful if cloning the dimensions or other marks does not produce satisfactory results. Using this option does not create any new views.

4. On the same tab, select which object types you want to clone.
5. If you want to create a drawing only for certain parts, select the parts from the model.

   You can also use an appropriate selection filter and select the whole model. Activate only the Select parts selection switch when you select objects, otherwise the selection may take a long time.

6. Click Create drawings or Create drawings for all parts.
7. Number the model if prompted to do so.

   Tekla Structures creates the drawings and adds them in Document manager. In the Document manager, cloned drawings are marked with the text Drawing was cloned in the Changes column.

8. Check the cloned drawing and modify it, if necessary.