Bolt location (87, 89)
Use the fields at the bottom of the Picture tab pages to create bolts in each bolt group, use the fields at the bottom of the Picture tab page(s):
Bolt group |
Tab |
---|---|
Connects all parts |
Picture |
Connects first and second brace picked to the tower leg |
Picture 2 |
-
Enter 0 to create a bolt on the intersection of gage lines
-
Enter 1 or more to move the bolt along the gage line, away from the end of the brace, on either the first or second diagonal brace picked:
Description | |
---|---|
1 |
First brace picked |
2 |
Second brace picked (component 89 only) |
3 |
Creates bolt at intersection of gage lines |
4 |
Moves bolt 30 mm along the gage line, away from the end of the brace |
To move a bolt towards the edge of the brace, enter a negative number, e.g. -10.