Seating with dowel to flange (77)
Seating with dowel to flange (77) connects the flanges of a beam to a column using anchor bolts and an optional corbel.
Parts created
-
Anchor bolts (2)
-
Nuts (2)
-
Washer plates (2)
-
Bearing plate (1)
-
Fittings for beam and column
-
Holes for bolts (2)
-
Corbel (optional)
-
Recess for nut and washer plates
Use for
Situation |
More information |
---|---|
|
Connects the flanges of a beam to a column using anchor bolts and a beveled corbel. Nuts and washer plates recessed. |
Before you start
Create the following parts:
-
Concrete column (Round or rectangular profile)
-
Concrete beam with flange (rectangular, HI, I, L, or inverted T profile)
Selection order
-
Select the main part (column).
-
Select the secondary part (beam).
The connection is created automatically when the second part is selected.
Picture tab
Use the Picture tab to define position and length of anchor bolt, and bolt hole dimensions and position.
Bolt hole
Enter the following bolt hole dimensions:
Description |
|
---|---|
1 |
Hole dimension in the direction of the beam. |
2 |
The distance from beam center line to hole center and bolt. |
3 |
Hole dimension in the direction perpendicular to the beam. |
Select the shape of the bolt hole:
Option |
Description |
---|---|
Rectangular Default |
|
Round |
Bearing plate
Select one of the following options to define the position of the bearing plate:
Option |
Description |
---|---|
Square with beam. Default |
|
Square with column. |
|
Square with column. Enter the distances from column edges. |
Dowel tab
Use the Dowel tab to define dowel properties.
Select to create the dowel as a reinforcement bar, poly-profile, or custom component part from the Type list.
Option |
Description |
---|---|
Profile |
Select the dowel profile from the profile catalog. |
Prefix, Start number |
Prefix and start number for the part position number. |
Material |
Material grade. The default material is defined in the Part material box in the Components settings in . |
Name |
Name that is shown in drawings and reports. |
Finish |
Describes how the part surface has been treated. |
Class |
Enter a number to group the parts that the component creates. By default, the class number affects the color in which the part is shown in model views. |
Size |
Diameter of the bars. |
Grade |
Strength of the steel used in the bars. |
Parts tab
Use the Parts tab to define bearing pad, drainage hole, bolt plate, nut and recess properties.
Part properties
Option |
Description |
---|---|
t, b, h |
Define the part thickness, width and height. |
Pos_No |
Define a prefix and a start number for the part position number. |
Material |
Define the material grade. |
Name |
Define a name for the part. |
Class |
Use Class to group the parts. |
Nut and bolt plate
Field |
Description |
---|---|
1 |
Nut width. |
2 |
Bolt plate width. |
Recess
To cut a recess in the beam web, select the Yes option in the Create recess list. Enter the following dimensions to define the recess:
Corbel tab
Use the Corbel tab to create a corbel and define its properties.
Select to create a corbel from the Create corbel list.
The options for chamfering corbels are:
Option |
Description |
---|---|
|
Beveled Default |
|
Straight |
|
Rounded |
Define the placement of the corbel rebar.
Option |
Description |
---|---|
t, b, h |
Define the thickness, width, and height of the part. |
Pos_No |
Prefix and start number for the part position number. The default part start number is defined in the Components settings in . |
Name |
Name that is shown in drawings and reports. |
Class |
Part class number. |
General tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more: