.db1

Model database

.db2

Numbering database

environment.db

Database for user-defined attribute definitions

xslib.db1

Contains information on user-defined connections and details, and default component descriptions.

.idrm

Mapping file, which handles IDs. Do not modify.

xslib.db2

Contains numbering information.

options_model.db and options_drawings.db

Contain values for model-specific options from the Options dialog box and values for model-specific advanced options from the Advanced Options dialog box. When a model is created, Tekla Structures reads model-specific options and advanced options values from the standard.opt file and .ini files in the environment folders and saves them in these two databases.

history.db

Model history database.

xsdb.xs

File used for displaying the name of the model in the Open dialog box.

xs_user.<username>

Contains interface settings specified by the user.

Each time a model is saved, an xs_user.<username> file is created or updated. These settings are user specific. If the xs_user.<username> file is not found in the model folder when you open the model, Tekla Structures searches for the xs_user.default file in the following folder search order: model, model\attributes, project, XS_​FIRM\attributes, system. If this file is not found, Tekla Structures default settings will be used.

This file contains settings for many of the options in the Options dialog box and the settings for the icons on the Selecting and Snapping toolbars.

save_history.log

Tekla Structures stores the information in this file each time the model is saved. The file includes the saving time, date and information on any conflicts during saving.

notification_report.xsr

File used for displaying a notification report of assignments when you open a model.

TeklaStructuresModel.xml

Contains information on the Tekla Structures session, for example on opening, closing and what catalogs are being used.

dotlog.txt

A log file that contains information on Tekla Open API application use.

.locked

A temporary file that locks the model folder files to prevent modifications while the model is in use.

.bak

A backup copy of the model database.

assert.txt

A log file that contains information on assertion errors.

ClashCheck.txt

A log file that contains information on clashes found in the most recent clash check and the date and time of the clash check.

ClashCheck.history

A file that contains information on all clashes found in all clash checks and the dates and times of the clash checks.

wizard.txt

Tekla Structures stores information in this file when you run a drawing rule set (wizard) file. The file contains, for example, errors, number of drawings created, and information on which commands were used.

.lis

Different catalogs can be exported from and imported to different Tekla Structures models as .lis files. These include profile, material and bolt catalogs.

.tsc

Shapes can be exported from and imported to different Tekla Structures models as .tsc files.

.This_is_multiuser_model

Contains information about the PC running the Tekla Structures multi-user server.

Do not alter or delete this file in normal circumstances. If you move a model to a different server, you should delete this file. Tekla Structures generates a new file with the same name.

ComponentCatalog.xml

Contains the model level catalog definitions of the Applications & components catalog.

<user>_ComponentCatalogUserSettings.xml

Lists the recently used applications and components, and their location in the Applications & components catalog structure.

Worktypes.xml

Lists available task types. Created when you start Task Manager.

WorkTypeProperties.xml

Lists allowed property types and their units.

.tmp

A file used to store temporary data.

.cnv

A file used to map Tekla Structures profile and material names with names used in other software.

.colorset

.ifc

The analysis model exported in IFC format.

.stp

The analysis model exported in CIS/2 format.

.map

A file used for debugging analysis models.

analysis_results.db5

Database for analysis load combination results.

.db6

Analysis model database.

.rop

Reference object properties

.rop.more

Reference object user-defined attribute properties

.m10000017

FabTrol XML import properties

.m10000015

Import attribute properties

.ncf

NC file properties

.ExportIFC.MainDialog

IFC export properties

.m440000004

3D DWG/DXF export properties

.m440000003

3D DGN export properties

.m1000004

FEM export properties

.m10000011

CIS analysis model export properties

.m10000026

CIS manufacturing model export properties

.m1000007

CAD export properties

.m10000016

Cover sheet export properties

.SObjGrp

Model selection filter properties

.VObjGrp

Model view filter properties

.OrgObjGrp

Organizer filter properties

.PObjGrp

Object group filter properties

.grd

Rectangular grid properties

.grd.more

Rectangular grid user-defined attribute properties

.rgrd

Radial grid properties

.rgrd.more

Radial grid user-defined attribute properties

.grdp

Grid line properties

.grdp.more

Grid line user-defined attribute properties

.cnl

Construction line properties

.cncrl

Construction circle properties

.cnarc

Construction arc properties

.cnplycrv

Construction polycurve properties

.mvi

Model view properties that you have saved for the model.

Default 3D, part, component, custom component, assembly, and cast unit view settings files need to be saved with names used in common environment:

3D view: basic_view

3D part view: part_basic_view

Part front view: part_front_view

Part top view: part_top_view

Part end view: part_end_view

Part perspective view: part_persp_view

3D component view: component_basic_view

Component front view: component_front_view

Component top view: component_top_view

Component end view: component_end_view

Component perspective view: component_persp_view

Custom component front view: custom_object_editor_front_view

Custom component top view: custom_object_editor_top_view

Custom component end view: custom_object_editor_end_view

Custom component perspective view: custom_object_editor_perspective_view

3D assembly or cast unit view: assembly_basic_view

Assembly or cast unit front view: assembly_front_view

Assembly or cast unit top view: assembly_top_view

Assembly or cast unit end view: assembly_end_view

Assembly or cast unit back view: assembly_back_view

Assembly or cast unit bottom view: assembly_bottom_view

Assembly or cast unit perspective view: assembly_persp_view

.gvi

Saved properties for creating views along grid lines

.rep

Object representation properties

.clm

Steel column properties

.clm.more

Steel column user-defined attribute properties

.prt

Steel beam properties

.prt.more

Steel beam user-defined attribute properties

.sb

Steel spiral beam properties

.sb.more

Steel spiral beam user-defined attribute properties

.crs

Orthogonal beam properties

.crs.more

Orthogonal beam user-defined attribute properties

.dia

Twin profile properties

.dia.more

Twin profile user-defined attribute properties

.cpl

Contour plate properties

.cpl.more

Contour plate user-defined attribute properties

.blp

Bent plate properties

.blp.more

Bent plate user-defined attribute properties

.lpl

Lofted plate properties

.lpl.more

Lofted plate user-defined attribute properties

.ips

Item properties

.ips.more

Item user-defined attribute properties

.cpf

Pad footing properties

.cpf.more

Pad footing user-defined attribute properties

.csf

Strip footing properties

.csf.more

Strip footing user-defined attribute properties

.ccl

Concrete column properties

.ccl.more

Concrete column user-defined attribute properties

.cbm

Concrete beam or concrete polybeam properties

.cbm.more

Concrete beam or concrete polybeam user-defined attribute properties

.csb

Concrete spiral beam properties

.csb.more

Concrete spiral beam user-defined attribute properties

.csl

Concrete slab properties

.csl.more

Concrete slab user-defined attribute properties

.cpn

Concrete panel properties

.cpn.more

Concrete panel user-defined attribute properties

.lsl

Concrete lofted slab properties

.lsl

Concrete lofted slab user-defined attribute properties

.ipc

Concrete item properties

.ipc.more

Concrete item user-defined attribute properties

.rbr

Reinforcing bar properties

.rbr.more

Reinforcing bar user-defined attribute properties

.rbg

Reinforcing bar group properties

.rbg.more

Reinforcing bar group user-defined attribute properties

.rcu

Curved reinforcing bar group properties

.rci

Circular reinforcing bar group properties

.rbm

Reinforcement mesh properties

.rbm.more

Reinforcement mesh user-defined attribute properties

.rbs

Reinforcement strand pattern properties

.rbs.more

Reinforcement strand pattern user-defined attribute properties

.rsp

Reinforcement splice properties

.rsp.more

Reinforcement splice user-defined attribute properties

.rst

Rebar set properties

.rst.more

Rebar set user-defined attribute properties

.rst.zones

Rebar set spacing zone properties

.rst_pm

Rebar set property modifier properties

.rst_pm.more

Rebar set property modifier user-defined attribute properties

.rst_edm

Rebar set end detail modifier properties

.rst_edm.more

Rebar set end detail modifier user-defined attribute properties

.rst_sm

Rebar set splitter properties

.admodel

Analysis model properties

.admodel.more

Analysis model user-defined attribute properties

.lm1

Point load properties

.lm2

Line load properties

.lm3

Area load properties

.lm4

Uniform load properties

.m10000028

Wind load properties

.lm6

Temperature load properties

.lco

Load combination properties

.adnode

Analysis node properties

.adnode.more

Analysis node user-defined attribute properties

.prt_ad, .prt_design

File types associated with steel beam analysis property settings. .prt_ad contains information associated with the analysis part properties and .prt_design contains information associated with the actual steel beam design.

.crs_ad, .crs_design

File types associated with orthogonal steel beam analysis property settings. .crs_ad contains information associated with the analysis part properties and .crs_design contains information associated with orthogonal steel beam design.

.clm_ad, .clm_design

File types associated with steel column analysis property settings. .clm_ad contains information associated with the analysis part properties and .clm_design contains information associated with the actual steel column design.

.dia_ad, .dia_design

File types associated with steel twin profile analysis property settings. .dia_ad contains information associated with the analysis part properties and .dia_design contains information associated with actual twin profile design.

.cpl_ad, .cpl_design

File types associated with contour plate analysis property settings. .cpl_ad contains information associated with the analysis part properties and .cpl_design contains information associated with actual contour plate design.

.cpf_ad, .cpf_design

File types associated with pad footing analysis property settings. .cpf_ad contains information associated with the analysis part properties and .cpf_design contains information associated with the actual pad footing design.

.csf_ad, .csf_design

File types associated with strip footing analysis property settings. .csf_ad contains information associated with the analysis part properties and .csf_design contains information associated with the actual strip footing design.

.ccl_ad, .ccl_design

File types associated with concrete column analysis property settings. .ccl_ad contains information associated with the analysis part properties and .ccl_design contains information associated with the actual concrete column design.

.cbm_ad, .cbm_design

File types associated with concrete beam analysis property settings. .cbm_ad contains information associated with the analysis part properties and .cbm_design contains information associated with the actual concrete beam design.

.csl_ad, .csl_design

File types associated with concrete slab analysis property settings. .csl_ad contains information associated with the analysis part properties and .csl_design contains information associated with the actual slab design.

.cpn_ad, .cpn_design

File types associated with concrete panel analysis property settings. .cpl_ad contains information associated with the analysis part properties and .cpl_design contains information associated with the actual concrete panel design.

.srf

Surface treatment properties

.srf.more

User-defined surface treatment attribute properties

.srfo

Surface properties

.srfo.more

User-defined surface attribute properties

.cha

Edge chamfer properties

.cha.more

User-defined edge chamfer attribute properties

.scr

Bolt properties

.scr.more

User-defined bolt attribute properties

.wld

Weld properties

.wld.more

User-defined weld attribute properties

*.udwcs

User-defined weld cross sections (UserDefinedWeldCrossSections.udwcs)

.m1000009

Control number properties

.m1000010

Control number locking properties

.num

Numbering setup properties

.rpr

Report properties

.4d

Project status visualization properties

standard.opt

Settings are saved in standard.opt in the \attributes folder only when you save your own settings in the Options dialog box using Save.

There is a standard.opt file in the environment folder that gives the initial values to be loaded when a model is created.

.dprt

Object level part properties

.dim

Object level dimension properties

.pm

Object level part mark properties

.jm

Object level connection mark properties

.sm

Object level bolt mark properties

.rm

Object level reinforcement mark properties

.mrms

Object level merged reinforcement mark properties

.pom

Pour object mark properties

.surfm

Object level surface treatment mark properties

.note

Object level associative note properties

.wls

Object level weld mark properties

.lev

Object level level mark properties

.rev

Object level revision mark properties

.drmsh

Object level reinforcement mesh properties

.drbr

Object level reinforcement properties

.po

Object level pour object properties

.sc

Object level bolt properties

.srf

Object level surface treatment properties

.dgr

Object level grid properties

.sbl

Object level symbol properties

.wls

Object level weld mark properties

.drtxt

Object level text properties

.gln

Object level line properties

.grt

Object level rectangle properties

.gci

Object level circle properties

.gar

Object level arc properties

.gpl

Object level polyline properties

.gpg

Object level polygon and cloud properties

.vi

.vi.copt

View level view properties

.vclassif

.vclassif.copt

View level detailed object level settings

.vpm

View level part mark properties

.vsm

View level bolt mark properties

.vnpm

View level neighbor part mark properties

.vsurfm

View level surface treatment mark properties

.vjm

View level connection mark properties

.vrm

View level reinforcement mark properties

.vnrm

View level neighbor reinforcement mark properties

.vpom

View level pour object mark properties

.vp

View level part properties

.vs

View level bolt properties

.vnp

View level neighbor part properties

.vsurf

View level surface treatment properties

.vw

View level welding properties

.vr

View level reinforcement properties

.vnr

View level neighbor reinforcement properties

.vrmp

View level reference object properties

.vpo

View level pour object properties

.vg

View level grid properties

.vf

View level filter properties

.vnf

View level neighbor part filter properties

.wd

.wd.copt

Single-part drawing properties

.wd.more

Single-part drawing user-defined attributes

.wdf

Single-part drawing filter properties

.wdnf

Single-part drawing neighbor part filter properties

.wdl

Single-part drawing layout properties

.wdl.more

Single-part drawing user-defined layout attributes

.wdv

Single-part drawing view properties

.wdv.more

Single-part drawing user-defined view attributes

.wdc

Single-part drawing section view properties

.wdc.more

Single-part drawing user-defined section view attributes

.wdd

Single-part drawing dimension properties

.wdd.more

Single-part drawing user-defined dimension attributes

.wdcd

Single-part drawing dimensioning properties

.wdcd more

Single-part drawing user-defined dimensioning attributes

.wpm

Single-part drawing part mark properties

.wsm

Single-part drawing bolt mark properties

.wnpm

Single-part drawing neighbor part mark properties

.wdsurfm

Single-part drawing surface treatment mark properties

.wdsurfm.more

Single-part drawing user-defined surface treatment mark attributes

.wjm

Single-part drawing connection mark properties

.wdp

Single-part drawing part properties

.wds

Single-part drawing bolt properties

.wds.more

Single-part drawing user-defined bolt attributes

.wdnp

Single-part drawing neighbor part properties

.wdnp.more

Single-part drawing user-defined neighbor part attributes

.wdsrf

Single-part drawing surface treatment properties

.wdsrf.more

Single-part drawing user-defined surface treatment attributes

.wdgr

Single-part drawing grid properties

.wdgr.more

Single-part drawing user-defined grid attributes

.wdr

Single-part drawing protection properties

.wdr.more

Single-part drawing user-defined protection attributes

.ad

Assembly drawing properties

.ad.more

Assembly drawing user-defined attributes

.adf

Assembly drawing filter properties

.adnf

Assembly drawing neighbor part filter properties

.adl

Assembly drawing layout properties

.adl.more

Assembly drawing user-defined layout attributes

.adv

Assembly drawing view properties

.adc

Assembly drawing section view properties

.add

Assembly drawing dimension properties

.add.more

Assembly drawing user-defined dimension attributes

.adcd

Assembly drawing dimensioning properties

.adcd.more

Assembly drawing user-defined dimensioning attributes

.apm

Assembly drawing part mark properties

.asm

Assembly drawing bolt mark properties

.anpm

Assembly drawing neighbor part mark properties

.adsurfm

Assembly drawing surface treatment mark properties

.adsurfm.more

Assembly drawing user-defined surface treatment mark attributes

.ajm

Assembly drawing connection mark properties

.adp

Assembly drawing part properties

.adp.more

Assembly drawing user-defined part attributes

.ads

Assembly drawing bolt properties

.adnp

Assembly drawing neighbor part properties

.adnp.more

Assembly drawing user-defined neighbor part attributes

.adsrf

Assembly drawing surface treatment properties

.adsrf.more

Assembly drawing user-defined surface treatment attributes

.adw

Assembly drawing welding properties

.adw.more

Assembly drawing user-defined welding attributes

.adgr

Assembly drawing grid properties

.adgr.more

Assembly drawing user-defined grid attributes

.adr

Assembly drawing protection properties

.cud

.cud.copt

Cast unit drawing properties

.cud.more

Cast unit drawing user-defined attributes

.cudl

Cast unit drawing layout properties

.cudl.more

Cast unit drawing user-defined layout attributes

.cudv

Cast unit drawing view properties

.cudv.more

Cast unit drawing user-defined view attributes

.cudc

Cast unit drawing section view properties

.cudc.more

Cast unit drawing user-defined section view attributes

.cudd

Cast unit drawing dimension properties

.cudd.more

Cast unit drawing user-defined dimension attributes

.cudcd

Cast unit drawing dimensioning properties

.cudcd.more

Cast unit drawing user-defined dimensioning properties

.cupm

Cast unit drawing part mark properties

.cusm

Cast unit drawing bolt mark properties

.cunpm

Cast unit drawing neighbor part mark properties

.cudsurfm

Cast unit drawing surface treatment mark properties

.cudsurfm.more

Cast unit drawing user-defined surface treatment mark attributes

.cudrm

Cast unit drawing reinforcement mark properties

.cudrm.more

Cast unit drawing user-defined reinforcement mark attributes

.cudp

Cast unit drawing part properties

.cudp.more

Cast unit drawing user-defined part attributes

.cuds

Cast unit drawing bolt properties

.cuds.more

Cast unit drawing user-defined bolt attributes

.cudnp

Cast unit drawing neighbor part properties

.cudnp.more

Cast unit drawing user-defined neighbor part attributes

.cudsrf

Cast unit drawing surface treatment properties

.cudsrf.more

Cast unit drawing user-defined surface treatment attributes

.cudr

Cast unit drawing reinforcement properties

.cudr.more

Cast unit drawing user-defined reinforcement attributes

.cudw

Cast unit drawing welding properties

.cudw.more

Cast unit drawing user-defined welding attributes

.cudgr

Cast unit drawing grid properties

.cudgr.more

Cast unit drawing user-defined grid attributes

.cudrp

Cast unit drawing protection properties

.cudrp.more

Cast unit drawing user-defined protection attributes

.cuf

Cast unit drawing filter properties

.cunf

Cast unit drawing neighbor part filter properties

.gd

.gd.copt

General arrangement drawing properties

.gclassif

.gclassif.copt

General arrangement drawing detailed object level settings

.gd.more

General arrangement drawing user-defined properties

.gdl

General arrangement drawing layout properties

.gdl.more

General arrangement drawing user-defined layout attributes

.gdv

General arrangement drawing view properties

.gdv.more

General arrangement drawing user-defined view attributes

.gdd

General arrangement drawing dimension properties

.gdd.more

General arrangement drawing user-defined dimension attributes

.gdcd

General arrangement drawing dimensioning properties

.gdcd.more

General arrangement drawing user-defined dimensioning attributes

.gpm

General arrangement drawing part mark properties

.gsm

General arrangement drawing bolt mark properties

.gnpm

General arrangement drawing neighbor part mark properties

.gdsurfm

General arrangement drawing surface treatment mark properties

.gdsurfm.more

General arrangement drawing user-defined surface treatment mark attributes

.gjm

General arrangement drawing connection mark properties

.gdrm

General arrangement drawing reinforcement mark properties

.gdrm.more

General arrangement drawing user-defined reinforcement mark attributes

.gnrm

General arrangement drawing neighbor reinforcement mark properties

.gpom

General arrangement drawing pour object mark properties

.gdp

General arrangement drawing part properties

.gdp.more

General arrangement drawing user-defined part attributes

.gds

General arrangement drawing bolt properties

.gds.more

General arrangement drawing user-defined bolt attributes

.gdnp

General arrangement drawing neighbor part properties

.gdnp.more

General arrangement drawing user-defined neighbor part attributes

.gdsrf

General arrangement drawing surface treatment properties

.gdw

General arrangement drawing welding properties

.gdw.more

General arrangement drawing user-defined welding attributes

.gdr

General arrangement drawing reinforcement properties

.gdr.more

General arrangement drawing user-defined reinforcement attributes

.gnr

General arrangement drawing neighbor reinforcement properties

.gpo

General arrangement drawing pour object properties

.gpbr

General arrangement drawing pour break properties

.gdrmp

General arrangement drawing reference object properties

.gdrmp.more

General arrangement drawing user-defined reference model attributes

.gdgr

General arrangement drawing grid properties

.gdgr.more

General arrangement drawing user-defined grid attributes

.gdrp

General arrangement drawing protection properties

.gdrp.more

General arrangement drawing user-defined protection attributes

.gdf

General arrangement drawing filter properties

.gdnf

General arrangement drawing neighbor part filter properties

.md

Multidrawing properties

.md.more

Multidrawing user-defined attributes

.mdl

Multidrawing layout properties

.mdl.more

Multidrawing user-defined layout attributes

.mdr

Multidrawing protection properties

.mdr.more

Multidrawing user-defined protection attributes

.dg

Drawing files

.ldb

Drawing export layer properties

.ldr

Drawing link properties

.cs

Section symbol properties

.detail

Detail symbol properties

.fas

Text file properties

.fhl

Hyperlink properties

.dsf

Drawing selection filter properties. This file is saved when you select the Drawing > Selection filter check box in the Filter or Selection Filter properties.

.GridsDimXml

.ShapeDimXml

.HolesDimXml

.FilterDimXml

.OverallDimXml

.RecessesDimXml

.SecPartsDimXml

Dimensioning rules

.dg.DPM

Drawing snapshot files in the\<model>\drawings\snapshots subfolder. The files are created either automatically or based on a user request.

To create a snapshot of a drawing automatically at the same time that you create the drawing, set the the advanced option XS_DRAWING_CREATE_​SNAPSHOT_ON_DRAWING_​CREATION to TRUE. For more information about creating snapshots, see Snapshots in drawings.

.ifc

Exported IFC files

.nc1

NC (numerical control) files

ModelSharingService.key

FileSharing.ini

FileSharing.xml

.db

Created when Organizer is opened for the first time. Contains all property template and category information used in the model.

The database name shows the version of the database, for example, ProjOrg000020.db.

.propertytemplate

.category

.xsr

Tekla Structures reports

Files in the SessionFileRepository folder

Backup copies of the files that are updated or deleted in Tekla Model Sharing read in.

SessionFile.db

Database for managing model folder files in Tekla Model Sharing.

.storage

Configuration file of SessionFile.db.

.tez

.xml

Shape geometry descriptions in the \ShapeGeometries folder.

.xml

Shape descriptions in the Shapes folder.

.png

Screenshot taken in Tekla Structures.

.uni

Exported Unitechnik files