Create cast units

Tekla Structures
2020
Tekla Structures

Create cast units

By default, each concrete part is considered a separate cast unit. For construction purposes, you may need to merge several concrete parts into one cast unit. For example, a single cast unit could consist of a column with corbels.

Define the cast unit type of a part

You must define the cast unit type of concrete parts. Tekla Structures checks the cast unit type of the main part each time you create or modify a cast unit. Precast and cast-in-place parts cannot be mixed within a cast unit.

  1. Double-click a concrete part to open the part properties in the property pane.
  2. Go to the Cast unit section.
  3. In the Cast unit list, select one of the following:
    • Cast in place

      Cast units that are constructed fully in their final location.

    • Precast

      Cast units that are built at another location and transported to their final location for placement in the full structure.

  4. Click Modify to save the changes.
Note:

It is important to use the correct cast unit type, because some functionalities, for example numbering, are based on the cast unit type.

Create a cast unit

You need to specify which parts form the cast unit. Cast units can include reinforcement, as well as concrete parts.

  1. On the Concrete tab, click Cast unit > Create cast unit.
  2. Select the objects you want to include in the cast unit.
  3. Click the middle mouse button to create the cast unit.
Was this helpful?
Previous
Next