You can use Template Editor for creating bending schedules or pull-outs pictures on reinforcement bars and bent meshes, and control the type of information that is shown in the bending schedules.
Autoscaling pull-out pictures
There is a free attribute available for the PULLOUT attribute in graphical templates that you can use to define the scale type. If you set the free attribute ScaleType to 1 on the User tab in the Free attributes dialog box, the pull-out pictures will be scaled to fit the available space in both X and Y dimensions. As a result, the shape becomes out of proportion, but small segments can be seen more easily.
A bending shape may look like this if you do not define the free attribute ScaleType :
The same bending shape that uses the free attribute ScaleType with value 1.
Change the appearance of the pull-out pictures
Tekla Structures uses the settings in the rebar_config.inp file in the system folder defined by the advanced option XS_SYSTEM to define the appearance of the pull-out pictures. You can change the colors, lines, and dimension unit, format, and precision used in pull-out pictures, for example. For a list of settings and values in rebar_config.inp , see Reinforcement settings for drawings (rebar_config.inp)