General
|
Name
|
User-definable name of the column.
Tekla Structures uses part names in reports and in Document manager , and to identify parts of the same type.
|
Profile
|
Profile of the column.
|
Material
|
Material of the column.
|
Finish
|
Type of finish.
Finish is user-definable. It describes how the part surface has been treated.
|
Class
|
Use to group columns.
For example, you can display parts of different classes in different colors.
|
Position
|
Vertical
|
Vertical position of the column, relative to column's reference point.
|
Rotation
|
Rotation of the column around its axis on the work plane.
|
Horizontal
|
Horizontal position of the column, relative to column's reference point.
|
Top
|
Position of the second end of the column in the global z direction.
|
Bottom
|
Position of the first end of the column in the global z direction.
|
Cast unit
|
Cast unit numbering
|
Part prefix and start number for the part position number.
|
Cast unit
|
Indicate whether the column is precast or cast-in-place.
|
Pour phase
|
Pour phase of the cast-in-place parts. Use to separate pour objects from one another.
|
Deforming
|
Warping
|
Use to warp columns using deformation angles.
|
Cambering
|
Use to pre-camber the column.
|
Shortening
|
Use to shorten the column in the model. The true length of the column is decreased in the drawing.
|
Custom properties
|
More
|
Click the More button to open the user-defined attributes (UDAs) of the part. UDAs provide additional information about the part.
|