On this tab, you can add data attributes only, no geometric attributes. The attributes are either optional or obligatory. The length of some of the fields may be limited in the UT format, so keep the strings short.
Depending on the setting, the following attributes can be added: Counter , Cast unit number , Cast unit position , Part position , Part number , Part name , Cast unit position code , Cast unit name Cast unit GUID , Assembly control number (ACN) , Cast unit ID , Cast unit prefix , Cast unit thickness , Concrete part thickness , Cast unit width , Concrete part width , Main part thickness , Main part ID , Main part GUID , Main part UDA , Material , Name , UDA , User-defined text , Phase , Total quantity of part , Main part template , Part weight , Unit weight , Cast unit weight , Yes, with swapped X axis and Y axis , Template and Text[Template]#Counter.
Text[Template]#Counter :
- Text can be any text including punctuation marks.
- Write templates in brackets [].
- # adds a running number if the data content is the same in several entries.
- You can enter several templates and use text delimiters.
- If you start the Text[Template]#Counter with a template, add a space as the first character before the bracket.
- Template attributes are read from the main part.
- You can also use attributes that refer to another hierarchy level.
- You can use <VALUE> to inquire a part UDA and {VALUE} to inquire an assembly UDA. This makes it possible to use a shorter string instead of having to use a template property to designate UDAs.