Tekla Structures
Tekla Structures


You can export the 3D geometry of the cast units to the Unitechnik format. The result is a text file in ASCII format.

Supported versions of the Unitechnik format are:

  • 6.1.0 17.9.2009

  • 6.0.0 14.6.2005

  • 5.2b 11.9.2000

  • 5.0c 30.10.1997

Unitechnik format is intended for the production of the geometry of pallet- or table-produced precast elements such as solid, sandwich or double walls as well as panel slabs and half-slabs. You can export cast units consisting of concrete, steel and surface materials. Exporting of reinforcing bars (bent and not-bent), reinforcing bar groups and meshes with hooks is also supported.


Exported cast unit:

  1. Hole
  2. Steel embed
  3. Reinforcing bars, cages also supported (UT version 6.1.0)
  4. Insulation plate (green)

For details about exporting to Unitechnik, see Export to Unitechnik format.

For details about exporting to UXML and PXML, see Precast Production Export. You can download Precast Production Export from Tekla Warehouse.

For details about Unitechnik export settings, click the following links:

Unitechnik export: Main tab

Unitechnik export: TS configuration tab

Unitechnik export: Embeds tab

Unitechnik export: Reinforcement tab

Unitechnik export: Validation tab

Unitechnik export: Reinf. data specification tab

Unitechnik export: HEADER block data specification tab

Unitechnik export: Mounting part data specification tab

Unitechnik export: Line attributes tab

Unitechnik export: Pallet tab

Unitechnik export: Log files tab

Was this helpful?