Drawing sketch object properties

You can draw different kinds of sketch objects (graphical objects) in your drawings (lines, rectangles, polylines, polygons, arcs, circles) and use the sketch objects for highlighting particular spots of interest, for example. Use the properties dialog boxes of different sketch objects to check and change the appearance of the shapes.

To open the properties dialog box of a sketch object, go to the Drawings tab, hold down Shift and click the sketch object command. When you have added a sketch object in a drawing, you can open its properties by double-clicking the object.

The settings you have in the dialog box vary depending on the sketch object type.

Setting	Description
Behind model objects	When set to Yes , places the graphical object behind model objects.
Line: Type	Defines the line type of the object.
Line: Color	Defines the color of the object lines.
Line: Bulge or Bulge for all lines.	Values 0 - 1.The bulge factor defines the curvature of the curved segments of objects using the calculation: Arc height = Line length * Bulge factor Changing the bulge factor of a polyline or polygon modifies all the segments of that object.
Line: Radius	Defines the radius of arcs and circles.
Arrow: Position
Arrow: Type
Arrow: Height
Arrow: Length
Fill: Type	Defines the fill type to be used in the object. Clicking Select to shows the available hatch types.
Fill: Color	Defines the color of the fill.
Fill: Background	Defines the background color of the fill.
Scaling in direction x Scaling in direction y Keep ratio of x and y	Defines the fill scales in the x and y direction.
Angle	Rotates the fill. Angle 0.0 is for horizontal and 90.0 for vertical.
Offset	Moves the fill pattern inside the object to in the x and y direction by the specified value.

See also

Define hatches in drawings

Draw sketch objects in drawings