Select the views that you want to create in single-part, assembly or cast unit drawings |
Define the views to create in single-part, assembly and cast unit drawings |
Define automatic view properties for general arrangement drawings |
Define automatic view settings for general arrangement drawings |
Define automatic view properties for section views |
Define automatic section view properties |
Define the contents of the main view and section view labels before you create the drawing |
Define view labels and view label marks |
Define how Tekla Structures places the projections of a part in cast unit, single-part, and assembly drawings |
Set drawing view projection type |
Include single-part drawings of the individual parts that make the assembly in assembly drawings |
Include single-part drawings in assembly drawings |
Adjust the orientation of parts by changing the coordinate system, rotating parts in drawing views, setting viewing direction of columns, beams or bracings, or changing the project north |
Part orientation in drawing views |
Show neighbor parts in drawing views |
Show neighbor parts in drawings |
Shorten or lengthen parts in model or drawing views |
Shorten or lengthen parts |
Unfold polybeams and bent plates in single-part drawings according to unfolding parameters |
Unfold polybeams in drawings |
Undeform warped or cambered parts and show the developed shape of deformed parts in drawings |
Undeform deformed parts in drawings |
Show symbols for part openings and recesses (blind holes) in drawing views |
Show part openings and recesses in drawings |