Use the Bolt Catalog dialog box to view and modify the properties of individual bolt elements, such as bolts, washers, and nuts. The units depend on the settings in File menu > Settings > Options > Units and decimals.
The type of the bolt element. The options are:
The name of the bolt element standard.
Used in the Bolt Assembly Catalog dialog box for defining bolt elements in a bolt assembly.
Use different names for bolt, nut, washer, and stud standards to distinguish bolt element types from each other.
The diameter of the bolt element.
The length of the bolt element.
The weight of the bolt element.
The length of the part of the bolt that protrudes from the nut.
The value is used in bolt length calculation.
The thickness of the bolt head.
The length of the threaded part of the bolt shaft.
The value is not used in bolt length calculation (value is 0) if the bolt is fully-threaded.
The tolerance between the washer inner diameter and the bolt diameter.
The value is used when searching for the correct-sized washer for the bolt. Not used in bolt length calculation.