| Content tab - Hidden lines |
| Hidden lines on/off |
Click on to display pour object hidden lines. |
| Own hidden lines on/off |
Click on to display own hidden lines. |
| Content tab - Addional marks |
| Edge chamfers on/off |
Select on to display edge chamfers. |
| Fillet edges on/off |
Select on to display fillet edges. |
| Appearance tab - Visible lines |
| Color |
Select the color of the visible pour object lines. |
| Type |
Select the type of the visible pour object lines. |
| Appearance tab - Hidden lines |
| Color |
Select the color of the hidden pour object lines. |
| Type |
Select the type of the hidden pour object lines. |
| Fill tab To add a fill for outer pour faces, use the Pour faces area, and to add a fill for cross sections in section views, use the Sections area.
|
Type
|
Defines the fill type. Clicking the button next to the list opens a preview of the hatch patterns.
Automatic selects the fill type automatically from the hatch pattern schema files.
None uses no fill.
|
Color
|
Defines the color for the fill.
You can select a predefined color or use Special color that is not converted to black in printouts.
|
Background
|
Defines the background color for the fill.
Background color selection is disabled for hardware hatches.
Background color can be set for automatic hatches, but it has effect only if automatic hatch is not defined for the material in the hatch pattern schema file.
|
Scale
|
Automatic scales and rotates the fill automatically.
Custom allows you to select scaling and rotation manually.
Scaling in direction x and Scaling in direction y define the scales in x and y direction.
Keep ratio of x and y retains the relative proportions in the hatch pattern.
Angle rotates the fill. For example, Angle 0.0 is for horizontal and Angle 90.0 for vertical.
|
