Modify grid and grid line properties in drawings

Tekla Structures
2018
Tekla Structures

Modify grid and grid line properties in drawings

You can modify grid properties on the drawing and view levels, and properties of individual grids or grid lines in an open drawing.

To modify the grid or grid line properties on object level in an open drawing:

  1. Ensure that you have the correct selection switch selected.

    To modify grids, use the selection switch, and to modify grid lines, use.

  2. Double-click the grid or the grid line. Tekla Structures opens the Grid properties or Grid line properties dialog box.
  3. Visible shows the grid lines in the drawing. If you want to see the labels only, select Only grid labels visible.
  4. Modify the label text placing, grid line and text settings as required.
  5. Click Modify.
Note:

You can also set a fixed width to the grid label frames and set a width factor for the grid label frames:

XS_​DRAWING_​GRID_​LABEL_​FRAME_​FIXED_​WIDTH

XS_​DRAWING_​GRID_​LABEL_​FRAME_​LINE_​WIDTH_​FACTOR

Was this helpful?
Previous
Next