Drawing settings tell Tekla Structures what the drawing should look like and what it should include. Automatic drawing settings are defined before drawings are created.
Automatic drawing settings are settings that are defined through:
Drawing, view and object properties in various drawing types. The properties are stored in properties files. Properties can be defined separately for each drawing that you create, but it is advisable to save the most commonly used settings in properties files for future use, for example, in Master Drawing Catalog. When creating a new drawing, always start by loading automatic drawing properties that you think contain the best settings for the drawing you are creating, and then adjust the settings as required before creating the drawing. Properties can be adjusted also after you have created the drawing.
You can open the drawing properties dialog boxes for setting the automatic drawing properties by going to the Drawings & reports tab, Drawing properties and then selecting the drawing type.
These drawings contain two types of automatic properties: drawing-specific and view-specific. Drawing-specific properties apply to the whole drawing: coordinate system, coordinate system rotation, drawing titles, drawing layout, user-defined properties, protection settings, and some detail and section view properties.
View-specific properties are defined separately for each view that you select to create. For example, you might want to show marks in one view, dimensions in another, and surface treatment in the third one. You can create as many views as you need.
To specify the drawing views to create and the properties to use, follow the path shown in the image below. First select the views to create and select view properties to be used for the views. If you need to adjust view properties or create new ones, click View properties and adjust the view properties, including dimensions, filters, marks and objects. Always use Save to save the view properties, otherwise your changes are not saved.
Drawing-level and view-level properties in single-part, assembly and cast unit drawings can be modified in an open drawing by double-clicking the drawing background or the view frame, respectively. The available properties are the same as in the dialog boxes shown above.
Automatic drawing properties for general arrangement drawings can be defined on drawing level before creating the drawing. You can modify the drawing level properties in an open drawing by double-clicking the drawing background.
You select the views that you want to create after activating the creation of a general arrangement drawing. You can adjust the view-level properties in an open drawing by double-clicking a view frame.
You can modify the dimension, mark and object properties manually in an open drawing and save the changed properties in properties files to be use later on for different purposes.