You can create single-part, cast unit and assembly drawings in Master Drawing Catalog using saved settings.

1. On the Drawings & reports tab, click Create drawings > Master drawing catalog.
2. Select the desired set of saved settings (drawing properties file) from the list.

   For cast unit drawings, select a file that contains the desired Cast unit definition method :

   • By cast unit position : A drawing will be created from each cast unit. If there are identical cast units, one of them will serve as the base cast unit for the drawing. This is the most common method for creating cast unit drawings.

   • By cast unit ID : Each part in the model has a unique GUID. You can create drawings by using cast unit GUIDs. The GUID determines the marking of the drawing. You can create several drawings from identical cast units.

3. If needed, modify the drawing properties and apply object-level settings. To do this, double-click the saved setting and click Edit drawing properties.... Remember to save your changes in the property file.
4. If you are creating a drawing only for selected objects, select the objects.

   You can also use an appropriate selection filter and select the whole model. Activate only the Select parts selection switch when you select objects, otherwise the selection may take a long time.

5. Click Create drawings ( Alt+C ) or Create drawings for all parts ( Alt+A ).
6. Number the model if you are asked to do so.