Tekla Structural Designer Integrator for Autodesk Revit 2023 SP1
The Tekla Structural Designer Integrator add-on that is compatible with Autodesk® Revit® 2023 now has a service pack 1 available.
Download Integrator for Autodesk Revit service packs
Download instructions:
- Select your version of Tekla Structural Designer.
- Select the Integrator for Autodesk Revit updates File type then Apply filter
- Click the
button adjacent to Addon for Autodesk Revit 2023
Service Pack 1
Check the information below to find out about the enhancements and fixes included in this service pack:
Fixed: Column stacks causing errors on import into Revit (TSD-14042)
An occasional issue where concrete column stacks were incorrectly aligned, leading to a fatal error within the Integrator has now been fixed. Export of the correctly aligned columns fixes the internal error message and allows the import to proceed.
Fixed: Create Analytical Model does not work when there are multiple levels in the same place (TSD-12836)
An issue where multiple levels at the same elevation within Revit stopped the Create Analytical Model command from working has now been fixed.
Fixed: Bracing location not replicated when imported into Revit (TSD-14038)
An occasional issue where bracing analytical wire locations were incorrectly positioned on import into Revit has been fixed. All analytical members relating to bracing members will now be correctly located during import.
Fixed: Profile mapping for US Imperial sections (TSD-13955)
The default location for profile mapping to US Imperial sections has been altered from the AISC 14.1 folder to the AISC 15.0 folder as a default.
e.g., For Structural Framing, the location has changed from:
- C:\ProgramData\Autodesk\RVT 202x\Libraries\English-Imperial\Structural Framing\Steel\AISC 14.1
to:
- C:\ProgramData\Autodesk\RVT 202x\Libraries\English-Imperial\Structural Framing\Steel\AISC 15.0
Other Issues
Other minor issues have been addressed based on your feedback. Thank you.
Note: The number in brackets after an item denotes an internal reference number.
This can be quoted to your local Support Department should further information
on an item be required.