Graphically review and modify the
gravity only setting of the beams and columns from a Review View using the Show/Alter State command Gravity only attribute.
CAUTION: If you specify a member as
'gravity only' it will only be designed/checked for active gravity combinations, all
other active combinations are ignored. For more information, see:
Design individual members for gravity only
If necessary, you can review and modify the gravity only setting of the beams and
columns in your model as follows;
-
Open a view and switch the view
regime to
Review View.
-
On the Review ribbon, click Show/Alter State.
-
Go to the
Properties window.
-
In the Attribute list, select Gravity only.
All members are color coded to
indicate their gravity only setting.
-
Do one of the following:
- Click a steel beam or
column to set its gravity only setting on or off.
- Hold down the left mouse
button and drag a box from left to right to set on or off the gravity only
setting of all steel beams and columns within the box.
- Hold down the left mouse
button and drag a box from right to left to set on or off the gravity only
setting of all steel beams and columns within the box or cut by the box.
