1. Home
  2. Tekla Structural Designer
  3. Review models
  4. Tabular review data
  5. Review material list tabular results
  6. Material lists for concrete

Material lists for concrete

Tekla Structural Designer
Modified: 10 Nov 2021
2025
Tekla Structural Designer

Material lists for concrete

Tip: When viewing a Material List tabular data view, clicking a column header sorts the table by that column. This can be useful for example when wanting to sort members by how much reinforcement they contain.

Beams and Columns

Note:
  • Summary reports provide total quantities for each section size
  • Detailed reports provide quantities on a span/stack basis
    • When group design is active this reduces to every detailing group span/stack
  • Reinforcement running between beam spans is shared
  • Reinforcement running between column stacks is shared
  • Reinforcement quantities are given in terms of weight and weight/unit volume
  • Reinforcement bar lengths are as shown in the member detail drawings
  • No additional detailing allowance has been applied
Fabrication Content View Type Description
Cast-in-place Members Summary

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)
Detail

One row for each span/stack:

Group/Member ref., section geometry, size, grade, number (of that ref), length, mass, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)
Loose Bars Detail

One row for each type:

type, unit mass, total length, total mass
Precast Members Summary

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume
Detail

One row for each span:

Member reference, section geometry, size, grade, number, length, mass, surface area, volume
Post-tensioned (Beams only) Members Summary

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume
Detail

One row for each span:

Member reference, section geometry, size, grade, number, length, mass, surface area, volume
Cast-in-place Loose Bars Detail

One row for each type:

type, unit mass, total length, total mass

Walls

Note:
  • Summary reports provide total quantities for each wall
  • Detailed reports provide quantities on a wall panel basis
  • Reinforcement running between panels is shared
  • Reinforcement quantities are given in terms of weight and weight/unit volume
  • Reinforcement bar lengths are as shown in the member detail drawings
  • No additional detailing allowance has been applied
Fabrication Content View Type Description
Cast-in-place Members Summary

One row for each wall:

reference, gross mass, mass, gross surface area, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)
Detail

One row for each panel:

Member reference, gross mass, mass, gross surface area, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)
Loose Bars Detail

One row for each type:

type, unit mass, total length, total mass
Mesh Detail

One row for each type:

type, unit mass, total area, total mass
Precast Members Summary

One row for each wall:

reference, gross mass, mass, gross surface area, surface area, volume
Detail

One row for each panel:

Member reference, gross mass, mass, gross surface area, surface area, volume
Loose Bars Detail

One row for each type:

type, unit mass, total length, total mass
Mesh Detail

One row for each type:

type, unit mass, total area, total mass

Slabs/Mats

Note:
  • Summary reports provide totals for the entire slab
  • Detailed reports are given on a slab item basis
  • Patch and punching reinforcement is approximately distributed by sharing it equally between slab items it touches - it is not split based on covered areas
  • Reinforcement allows for laps at the slab item boundary
  • An approximate user defined additional detailing allowance (specified in Design Settings for cast-in-place slabs) is applied to all reinforcement defined in any slab type.
  • Punching reinforcement weight is approximated (based on ACI guidance)
  • Precast and post-tensioned slabs are not designed, but the reinforcement that is specified in the slab properties is reported. The post-tensioned tendon information is not reported and must be allowed for in some other way.
Construc-tion Fabri-cation Content View Type Description
Composite N/A Members Sum.

One row for each slab:

level, slab, depth, manufacturer, reference, gauge, grade, mass, gross surface area, net surface area, volume, reinforcement
Det.

One row for each slab item:

level, slab, depth, manufacturer, reference, gauge, grade, mass, gross surface area, net surface area, volume, reinforcement
Loose Bars Det.

One row for each type:

type, unit mass, total length, total mass inc. allowance
Mesh Det.

One row for each type:

type, unit mass, total area, total mass inc. allowance
Non-composite Cast-in-place Members Sum.

One row for each slab:

level, slab, type, depth, grade, mass, gross surface area, net surface area, volume, reinforcement, punching reinforcement, total reinforcement (mass), total reinforcement (mass/unit area), total reinforcement (mass/ unit volume)
Det.

One row for each slab item:

level, slab, type, depth, grade, mass, gross surface area, net surface area, volume, reinforcement, punching reinforcement, total reinforcement (mass), total reinforcement (mass/unit area), total reinforcement (mass/ unit volume)
Loose Bars Det.

One row for each type:

type, unit mass, total length, total mass inc. allowance
Mesh Det.

One row for each type:

type, unit mass, total area, total mass inc. allowance
Precast Members Sum.

One row for each slab:

level, slab, depth, manufacturer, reference, unit depth, topping, grade, mass, gross surface area, net surface area, volume, reinforcement
Det.

One row for each slab item:

level, slab, depth, manufacturer, reference, unit depth, topping, grade, mass, gross surface area, net surface area, volume, reinforcement
Loose Bars Det.

One row for each type:

type, unit mass, total length, total mass inc. allowance
Mesh Det.

One row for each type:

type, unit mass, total area, total mass inc. allowance
Post Tension Members Sum.

One row for each slab:

level, slab, type, depth, grade, mass, gross surface area, net surface area, volume, reinforcement, punching reinforcement, total reinforcement (mass), total reinforcement (mass/unit area), total reinforcement (mass/ unit volume)
Det.

One row for each slab item:

level, slab, type, depth, grade, mass, gross surface area, net surface area, volume, reinforcement, punching reinforcement, total reinforcement (mass), total reinforcement (mass/unit area), total reinforcement (mass/ unit volume)
Loose Bars Det.

One row for each type:

type, unit mass, total length, total mass inc. allowance
Mesh Det.

One row for each type:

type, unit mass, total area, total mass inc. allowance

Punching checks

Note: The weight of punching shear rails is approximated based on ACI guidance.
Content View Type Description
Stud Rails Detail

One row for each rail ref:

ref., diameter,stud height, studs per rail, stud spacing, rail length, total no. of rails, approx. mass

Pad Bases, Pile Caps and Piles

Note:
  • Reports provide quantities for each individual base
  • Reinforcement quantities are given in terms of weight and weight/unit volume
  • No additional detailing allowance has been applied
Characteristic Content View Type Description

Pad Bases

Pile Caps

 Members Detail

One row for each base:

member reference, grade, mass, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)
Loose Bars Detail

One row for each type:

type, unit mass, total length, total mass
Mesh Detail

One row for each type:

type, unit mass, total area, total mass
Piles Members Detail

One row for each pile type:

reference, dimension, shape, installation type, installation length, number, total length
Was this helpful?
Previous
Next