| Auto/Check Design |
Each member is color coded to indicate its autodesign setting (On or Off). Clicking on
a member toggles its setting. |
| Diaphragm On/Off |
Each slab panel and diaphragm node is color coded to indicate its setting (Excluded or
Included). Clicking on a slab or a diaphragm node toggles its
setting. |
| Releases |
After selecting the required Entity type in the Properties window, each member/wall is
color coded to indicate its end fixity setting. In "Toggle" mode,
clicking on a member/wall toggles its fixity setting between those
fixity types that are applicable. |
| BIM Status |
Each member is color coded to indicate its BIM status. |
| Slab/Foundation Reinforcement |
Use property grid to review and edit or rationalize panel or patch reinforcement, or
isolated foundation reinforcement. |
| Section Material/Grade |
Each steel member is color coded to indicate its section and grade. Clicking on a
steel member updates its section and/or grade to match what you have
set in the Properties window. |
| Copy Properties |
Copy properties from one member to another. After firstly selecting a parameter in the
Properties window you are able to copy it from a designated source
member to valid target members. |
| Report Filter |
Only accessible once a Member filter has been defined. Each member is color coded to
indicate if it is included in the currently selected filter.
Clicking a member toggles its inclusion status. |
| Sub Structures |
Create selected sub-sets of the structure and use for more focused editing, design,
review and reporting purposes. |
| Concrete Beam Flanges |
Each concrete beam is color coded to indicate its if flanges are considered and flange
widths determined. |
| Column Splices |
Potential splice locations in steel columns are color coded to indicate where splices
exist. |
| Property Sets |
Graphically review and modify the property set assigned to the elements by using the
property grid. In a typical model you may wish to apply the same
properties to similar model objects. This can be done efficiently
using property sets. |
| UDA |
Graphically review and modify the attribute values assigned to the elements by using
the property grid. User defined attributes allow you to save your
own data to individual elements. These can be used to select similar
elements based upon their UDA group or filter report content based
on a UDA. |
| Show/Alter State |
The full range of options is available by selecting this and using the attribute drop
down in the property grid. |
