Minimum lateral loads settings
The page allows you to set up a minimum lateral load (MLL) on the structure as a percentage of the gravity loading.
| Item | Description |
|---|---|
|
Setup Minimum Lateral Loadcases |
Choose how many minimum lateral loads to apply.
If either 'Case A' or 'Case A & B' are selected, the following further inputs are required. |
|
Gravity Loads |
Select the load types used to be used in the calculation.
|
|
Using Combination |
Select the loads to be used in the calculation.
|
| Direction 1 | Set the percentage of the specified gravity load to be applied in Dir 1 |
| Direction 2 | Set the percentage of the specified gravity load to be applied in Dir 2 |