Checks performed (pad and strip base:EC2)
The checks performed for both directions are:
- EC7 - Max soil bearing pressure must not exceed allowable bearing pressure.
- EC2 - Provided steel must be greater than As,min for both vertical directions.
- EC2 - Provided bar spacing must be inside the limiting spacing
- EC2 - Provided bar size must be inside the limiting sizes
- EC2 - Check for bending moment capacity
- EC2 - Check for shear capacity
- EC2 - Punching check at column face
- EC2 - Punching check at critical perimeter
- EC7 - Check for overturning forces - not in the current release
- EC7 - Check for sliding
- EC7 - Check for uplift
Note:
EC7 - Check for overturning forces are beyond scope of the current release.