Tekla Structural Designer automatically creates a wall line at the centroid of every meshed shear wall to facilitate the display of wall forces.

1. Open a view and set the view regime to Results View.

   The Results ribbon is displayed.

2. Set the analysis type and loading for viewing analysis results.
3. In the 2D Integrated Results group, select Wall Lines, then from the droplist in the same group, select the desired result.
4. From the Text group select Forces to display values on the diagram.

   Tekla Structural Designer displays the selected result on the wall line.

   Tip: If you are working in a 2D view and you can't see any results, try displaying the view in isometric projection.