1. Home
  2. Tekla Structural Designer
  3. Apply loading
  4. Create and manage loadcases, groups, combinations, envelopes and patterns
  5. Create and manage load combinations
  6. Create modal mass combinations

Create modal mass combinations

Tekla Structural Designer
2023
Tekla Structural Designer

Create modal mass combinations

  1. On the Load tab, click Combination.

    The Loading dialog box opens on the Combinations page. On this page, you can see all currently existing load combinations.

  2. Click Add.
  3. In Design Combination Title, name the combination.
  4. In Class, set the combination class to Modal Mass.
  5. In the left side pane of the Loading dialog box, click the combination name.
  6. Select the loadcases that you want to add in the combination, and click >>.
  7. On the Applied mass tab, set the directions to be considered, and if necessary, specify the level below which mass can be ignored.
  8. On the Second order effects tab, define the amplifier that you want to apply to the combination.
  9. Click OK to save the load combination.

    Tekla Structural Designer adds the new load combination to the list of combinations in the Loading list.

Was this helpful?
Previous
Next