1. Home
  2. Tekla Structural Designer
  3. Create reports and drawings
  4. Create drawings
  5. Adjust and apply drawing settings

Adjust and apply drawing settings

Tekla Structural Designer
2022
Tekla Structural Designer

Adjust and apply drawing settings

To adjust the drawing settings of the current project or set them as default settings for future projects, see the following instructions.

Adjust drawing settings in the current project

  1. On the Draw tab, click Settings

    The Drawing Settings dialog box opens.

  2. Review and modify the drawing settings according to your needs.
  3. Do one of the following:
    • To apply the changes to the current project, click OK.
    • To save the changes to the selected settings set, click Save...
    • To revert to the drawing settings specified in the selected settings set, click Load...

Adjust drawing settings in future projects

  1. On the Home ribbon, click Settings.

    The Settings dialog box opens.

  2. Go to the Drawings page.
  3. In the list at the top of the page, select the settings set that you want to modify.
  4. Review and modify the drawing settings according to your needs.
  5. To save the settings as defaults for future projects that use the selected settings set, click OK.
Was this helpful?
Previous
Next