Review seismic drift check tabular results

Seismic drift check results can be reviewed by creating a Seismic drift tabular data view.

Seismic drift tabular data views:

can either be displayed in summary or detail:
- Summary Only (default) - the column/wall with most critical ratio for the selected combinations is reported for each direction at each level
- Detailed - the critical ratio in each direction at each level is reported for all columns/walls for the selected combinations
are displayed for all columns /walls (default), but you can also select by material, characteristic and fabrication
can have filters applied
can be examined in more detail by clicking the Details... button at the end of each row
are linked to the 3D view: double-clicking a row in the table locates the row entity in the 3D view
can be exported to a spreadsheet
are not suitable for direct printing, but the data can be included in a Building Analysis Checks report which can then be printed.

Review seismic drift check tabular results from the Project Workspace Status Tree

Go to the Project Workspace and in Status tree expand the Design branch.
Right click on Seismic Drift and from the context menu select Review Data Table
On the Review Data ribbon, choose if you want results displayed for all available material and member types, or a subset only:
- To display results for all available material and member types, in the View Type group, click Toggle Selection.
- To display results for a subset of materials/member types proceed as follows:
  1. In the Material Type group, select the material(s).
  2. In the Characteristic group, select the required characteristic(s).
  3. In the Fabrication group, select the fabrication type(s).
Choose if you want critical results determined from All Combinations, or a specific combination only:
- In the Loading list, select All Combinations.
- In the Loading list, select a specific combination.
Choose if you want to create a summary or a detailed report by selecting/unselecting Summary Only in the View Type group.

The tabular results are displayed as specified.

If required you can configure a filter to limit the display to sub-parts of the structure only (selected levels, selected frames etc.) To do this, see: Sort and filter tabular review data

Open a view and change the view regime to Review View.
On the Review ribbon, click Tabular Data

A Review Data tab is added to the ribbon and a Review Data View opens in a new window.
On the Review Data ribbon, in the list in the View Type group, select Seismic drift
Choose if you want results displayed for all available material and member types, or a subset only:
- To display results for all available material and member types, in the View Type group, click Toggle Selection.
- To display results for a subset of materials/member types proceed as follows:
  1. In the Material Type group, select the material(s).
  2. In the Characteristic group, select the required characteristic(s).
  3. In the Fabrication group, select the fabrication type(s).
Choose if you want critical results determined from All Combinations, or a specific combination only:
- In the Loading list, select All Combinations.
- In the Loading list, select a specific combination.
Choose if you want to create a summary or a detailed report by selecting/unselecting Summary Only in the View Type group.

The tabular results are displayed as specified.

If required you can configure a filter to limit the display to sub-parts of the structure only (selected levels, selected frames etc.) To do this, see: Sort and filter tabular review data

Double-clicking on a specific row in the tabular data view locates where the row content is in the model by highlighting it in a 3D view.

Tip: Make use of the “ghost unselected” feature to make highlighted entities clearer.