Review amplification factor Kamp
Note: The kamp factor is not applicable if using the ACI/AISC head code.
When the analysis method to be used in design has been set to the amplified forces method, the calculated amplification factor in both directions at each level can be reviewed by creating a Kamp tabular data view.
Kamp tabular data views:
- can either be displayed in summary or detail:
- Summary Only (default) - the column with most critical result for the selected combinations is reported for each direction at each level
- Detailed - the critical ratio in each direction at each level is reported for all columns for the selected combinations
- are displayed for all columns (default), but you can also select by material, characteristic and fabrication
- can have filters applied
- can be examined in more detail by clicking the Details... button at the end of each row
- are linked to the 3D view: double-clicking a row in the table locates the row entity in the 3D view
- can be exported to a spreadsheet
- are not suitable for direct printing, but by creating a report which includes the Analysis>Kamp chapter they can then be printed.
Review kamp tabular results from a Review View
Locate check in a 3D view
Tip: Make use of the “ghost unselected” feature to make highlighted entities clearer.