View model status in the Project Workspace
The Status tree is used to review the validation messages and other model status indicators.
You can review:
The validation status for the model
For more information, see: Validate the model
The validation status for the analysis
The analysis model validation is performed automatically when you analyze the model.
The decomposition status
The Decomposition branch shows if load decomposition has been successfully completed.
The solver status
The Solver branch lists the analyses that have been performed.
The BIM validation
If the model has been imported or exported, the BIM branch lists any warnings and errors that relate to the import or export process.
The status of drift, sway, wind drift, seismic drift checks and displacements
Each of these are reported automatically when the appropriate analysis has been performed. For more information, see: Check drift, sway, seismic drift, wind drift, and overall displacements
indicates that the analysis or process has been successfully completed.
indicates that the analysis or process has resulted in an error.
indicates that the analysis or process has resulted in a warning.