Material lists for concrete

Tekla Structural Designer
2020
Tekla Structural Designer

Material lists for concrete

Tip: When viewing a Material List tabular data view, clicking a column header sorts the table by that column. This can be useful for example when wanting to sort members by how much reinforcement they contain.

Beams and Columns

Note:
  • Summary reports provide total quantities for each section size
  • Detailed reports provide quantities on a span/stack basis
    • When group design is active this reduces to every detailing group span/stack
  • Reinforcement running between spans/stacks is shared
  • No additional detailing allowance has been applied
  • Reinforcement quantities are given in terms of weight and weight/unit volume
Characteristic Fabrication Content View Type Description
Beams Cast-in-place Members Summary

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)

Detailed

One row for each span:

Group/Member ref., section geometry, size, grade, number (of that ref), length, mass, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass

Precast Members Summary

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume

Detailed

One row for each span:

Member reference, section geometry, size, grade, number, length, mass, surface area, volume

Post-tensioned Members Summary

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume

Detailed

One row for each span:

Member reference, section geometry, size, grade, number, length, mass, surface area, volume

Columns Cast-in-place Members Summary

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)

Detailed

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass

Precast Members Summary

One row for each size:

section geometry, size, grade, number (of that size), total length, mass, surface area, volume

Detailed

One row for each stack:

Member reference, section geometry, size, grade, number, length, mass, surface area, volume

Walls

Note:
  • Summary reports provide total quantities for each wall
  • Detailed reports provide quantities on a wall panel basis
  • Reinforcement running between panels is shared
  • No additional detailing allowance has been applied
  • Reinforcement quantities are given in terms of weight and weight/unit volume
Characteristic Fabrication Content View Type Description
Walls Cast-in-place Members Summary

One row for each wall:

reference, gross mass, mass, gross surface area, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)

Detailed

One row for each panel:

Member reference, gross mass, mass, gross surface area, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass

Precast Members Summary

One row for each wall:

reference, gross mass, mass, gross surface area, surface area, volume

Detailed

One row for each panel:

Member reference, gross mass, mass, gross surface area, surface area, volume

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass

Slabs/Mats

Note:
  • Summary reports provide totals for the entire slab
  • Detailed reports are given on a slab item basis
  • Patch and punching reinforcement is approximately distributed by sharing it equally between slab items it touches - it is not split based on covered areas
  • Reinforcement allows for laps at the slab item boundary
  • An approximate user defined additional detailing allowance (specified in Design Settings for cast-in-place slabs) is applied to all reinforcement defined in any slab type.
  • Punching reinforcement weight is approximated (based on ACI guidance)
  • Precast and post-tensioned slabs are not designed, but the reinforcement that is specified in the slab properties is reported. The post-tensioned tendon information is not reported and must be allowed for in some other way.
Construction Fabrication Content View Type Description
Composite N/A Members Summary

One row for each slab:

level, slab, depth, manufacturer, reference, gauge, grade, mass, gross surface area, net surface area, volume, reinforcement

Detailed

One row for each slab item:

level, slab, depth, manufacturer, reference, gauge, grade, mass, gross surface area, net surface area, volume, reinforcement

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass inc. allowance

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass inc. allowance

Non-composite Cast-in-place Members Summary

One row for each slab:

level, slab, type, depth, grade, mass, gross surface area, net surface area, volume, reinforcement, punching reinforcement, total reinforcement (mass), total reinforcement (mass/unit area), total reinforcement (mass/ unit volume)

Detailed

One row for each slab item:

level, slab, type, depth, grade, mass, gross surface area, net surface area, volume, reinforcement, punching reinforcement, total reinforcement (mass), total reinforcement (mass/unit area), total reinforcement (mass/ unit volume)

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass inc. allowance

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass inc. allowance

Precast Members Summary

One row for each slab:

level, slab, depth, manufacturer, reference, unit depth, topping, grade, mass, gross surface area, net surface area, volume, reinforcement

Detailed

One row for each slab item:

level, slab, depth, manufacturer, reference, unit depth, topping, grade, mass, gross surface area, net surface area, volume, reinforcement

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass inc. allowance

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass inc. allowance

Post Tensioned Members Summary

One row for each slab:

level, slab, type, depth, grade, mass, gross surface area, net surface area, volume, reinforcement, punching reinforcement, total reinforcement (mass), total reinforcement (mass/unit area), total reinforcement (mass/ unit volume)

Detailed

One row for each slab item:

level, slab, type, depth, grade, mass, gross surface area, net surface area, volume, reinforcement, punching reinforcement, total reinforcement (mass), total reinforcement (mass/unit area), total reinforcement (mass/ unit volume)

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass inc. allowance

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass inc. allowance

Punching checks

Note: The weight of punching shear rails is approximated based on ACI guidance.
Content View Type Description
Stud Rails Detailed

One row for each rail ref:

ref., diameter,stud height, studs per rail, stud spacing, rail length, total no. of rails, approx. mass

Pad Bases, Pile Caps and Piles

Note:
  • Reports provide quantities for each individual base
  • Reinforcement quantities are given in terms of weight and weight/unit volume
Characteristic Content View Type Description
  • Pad Bases
  • Pile Caps
Members Detailed

One row for each base:

member reference, grade, mass, surface area, volume, reinforcement (mass), reinforcement (mass/unit volume)

Loose Bars Detailed

One row for each type:

type, unit mass, total length, total mass

Mesh Detailed

One row for each type:

type, unit mass, total area, total mass

Piles Members Detailed

One row for each pile type:

reference, dimension, shape, installation type, installation length, number, total length

Was this helpful?
Previous
Next